Trailed disc cultivators for shallow stubble cultivation up to 13 cm
SOFTER PS - trailed disc cultivators for shallow stubble cultivation
Tillage up to 13 cm depth with full area shaving and mixing.
- Working width 4 to 12 metres.
- Suitable for use with from 150 hp power technology.
- 510 or 560 mm diameter discs arranged in two rows, with 24 cm between discs and 75 cm between rows of discs.
- Working depth from 3,5 to 13 cm with intensive mixing.
Highlights of FARMET Softer PS
Setting the working depth
The simple depth adjustment from the setting chart allows you to quickly and accurately select the required depth. Adjustments are made using washers on the roller cylinder rods, so the settings are clear, reliable and easy to repeat. This ensures even tillage and efficient operation under different conditions.
Wide choice of discs
The Softer PS disc cultivator is available with 510 or 560 mm discs. The CrissCross discs provide aggressive cutting and intensive soil mixing, while the CrissCross discs ensure reliable tillage and good crop residue permeability. All discs are mounted on maintenance-free bearings with rubber impact protection.
Hydraulic clamping of side sections
The hydraulic system with pressure accumulator ensures even weight distribution over the entire working width. The side sections effectively follow the terrain, maintaining a constant working depth even in uneven conditions. This guarantees a uniform tillage quality and a stable working result.
Robust and durable construction
High-quality materials and eXtra STEEL technology ensure durability, even under tough working conditions. Maintenance-free disc fixing points and rubber connectors reduce operating costs. Each disc is individually mounted for stable operation and good crop residue throughput. Designed for intensive, maintenance-free operation.
Working areas
- Full-area shaving zone. The double disc section with aggressive geometry ensures perfect full-area cultivation at a depth of 3.5-13 cm with intensive mixing of crop residues. The disc section also distributes the crop residues well over the entire cultivation area.
- Crushing and compaction zone. Optimal soil compaction ensures good water infiltration and soil moisture retention.
High quality and efficient work
- The cut discs easily penetrate the soil and mix it intensively.
- Disc angle, high pressure force for each disc, ensures uncompromising penetration even in the heaviest or most dry soil and excellent tillage of the soil.
- High quality rubber couplings for optimal disc working angle to support.
- Precise depth support with optimal soil compaction.
Hydraulic clamping of the side sections with a pressure accumulator ensures an even distribution of weight over the entire working width and allows the sections to freely follow uneven terrain. For the Softer PS model, 510/560 mm diameter discs in two rows are available. Each disc is effectively protected against collision with obstacles by a rubber element suspension. The discs are mounted on technically reliable, maintenance-free bearings that ensure a long service life. The optimized disc geometry allows for high work quality, good performance and efficient incorporation of crop residues. Even when the discs are partially worn, they maintain an optimal working angle. The 24 cm distance between the discs ensures good crop residue throughput. You can also choose the new 510 mm diameter CrissCross wavy discs, which are suitable for efficient for treating tall stubble and catch crops. The special disc shape ensures aggressive cutting and intensive soil mixing. The discs effectively incorporate crop residues into the soil, improving their decomposition and nutrient absorption. The seedbed is optimally prepared, allowing the seed to germinate and the soil surface to be even. CrissCross discs mounted on the same hubs, which means they require no additional modifications and allow easy upgrading of existing equipment.
Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.
High quality materials Extremely high-quality materials used for the main components guarantee durability. Precisely calculated frame size made of high-strength steel. Maintenance-free disc mounting points Allows you to operate the cultivator without additional lubrication. Maintenance-free rubber joints For excellent surface adaptation and protection against overloads.
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Permanent connection of passages The height-adjustable deflector ensures a smooth transition between passes. Diversion of cultivated soil The side deflector is adjustable vertically and longitudinally, ensuring optimal distribution of the processed soil. Setting the working depth Simple adjustment of the working depth according to the setting chart using the adjustment washers on the roller cylinder rods.
One of the biggest advantages is versatility and adaptability, providing great work versatility.
Full perimeter disc edges Easier penetration of the discs into the soil. Constant pressure on the side frames Automatic terrain replication and continuous side frame clamping on Softer 8 and Softer 11 PS models thanks to hydraulic accumulator.
Micro Drill for sowing small seeds The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Disc cultivator Softer 4 PS
Disc scraper Softer 4.5 PS
Softer 8 PS disc cultivator with Micro Drill
Hydraulic clamping of side sections
Cut discs
CrissCross wavy discs
Sturdy construction
Easy to use
A cleverly designed machine
Examples of Softer PS disc cultivator configurations
Disc DURA+ Ø 510 mm Disc DURA+ Ø 510 mm Disc DURA+ Ø 530 mm Disc DURA+ Ø 510 mm Disc DURA+ Ø 560 mm CrissCross disc Ø 510 mm
Tubular TRS roller Diameter – 600 mm Double roller DR Diameter – 400/350 mm Double ring roller DRR Diameter – 540/540 mm Roller LTX Diameter – 586 mm Disc roller SDR Diameter – 580 mm Double smooth roller DFR Diameter – 520/520 mm V-shaped VR roller Diameter – 600 mm Double V-shaped annular roller DVR Diameter – 550/550 mm The right type of rear roller has a significant impact on the final quality of soil cultivation. The roller compacts the soil, while simultaneously crumbling and leveling it. The type of roller is selected depending on the type of soil and the nature of the machine's use.
Pin set for TPH category 4 TPH Category 3 Eyelet for lower hitch Ø 40 mm, Ø 50 mm, Ø 70 mm K80 Ø 80 mm
Hydraulic brakes Micro Drill small seed drill 2 lines 1 circuit air brakes Support wheels Double support wheels
Working tools
Rollers
Weight – 100 kg/m
Weight – 180 kg/m
Weight – 195 kg/m
Not included with Softer 11 PS, Softer 12 PS W
Weight – 200 kg/m
Weight – 220 kg/m
Weight – 165 kg/m
Not included with Softer 11 PS, Softer 12 PS W
Weight – 175 kg/m
Weight – 180 kg/m
Not included with Softer 11 PS, Softer 12 PS W
Features Tubular TRS roller Double roller DR Double ring roller DRR Roller LTX Disc roller SDR Double smooth roller DFR V-shaped VR roller Double V-shaped annular roller DVR
Crushing ●●○○ ●●●○ ●●●○ ●●○○ ●●●○ ●●●○ ●●●○ ●●●○
Compaction ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Resistance to clogging ●○○○ ●●●○ ●●●● ●●●○ ●●●○ ●●●● ●●●● ●●●●
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●● ●●●● ●●●● ●●●○ ●●●○ ●●●● ●●●● ●●●●
Towing
You can choose pins for TPH category 4.
Other optional equipment
| SOFTER 4 P FIX | SOFTER 4 PS | SOFTER 4.5 PS | SOFTER 5 PS | SOFTER 6 PS | SOFTER 8 PS | SOFTER 9 PS W | SOFTER 11 PS | SOFTER 12 PS W | |
|---|---|---|---|---|---|---|---|---|---|
| Type | trailed | trailed | trailed | trailed | trailed | trailed | trailed | trailed | trailed |
| Working width, mm | 3 990 | 3 990 | 4 470 | 4 950 | 5 910 | 7 360 | 8 320 | 10 690 | 11 670 |
| Transport width, mm | 4 330 | 3 000 | 3 000 | 3 000 | 3 000 | 3 000 | 4 000 | 3 000 | 4 000 |
| Transport height, mm | 1 600 | 2 400 | 2 650 | 2 900 | 3 370 | 4 000 | 4 000 | 4 000 | 4 000 |
| Total length, mm | 6 675 | 6 675 | 6 675 | 6 675 | 6 675 | 6 850 | 6 850 | 6 850 | 6 850 |
| Working depth, mm | 35–130 | 35–130 | 35–130 | 35–130 | 35–130 | 35–130 | 35–130 | 35–130 | 35–130 |
| Number of front discs, pcs. | 17 | 17 | 19 | 21 | 25 | 31 | 35 | 45 | 49 |
| Number of rear discs, pcs. | 16 | 16 | 18 | 20 | 24 | 30 | 34 | 44 | 48 |
| Disc diameter, mm | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 |
| Productivity, ha/hour | 4–6 | 4–6 | 4.5–6.8 | 5–7.5 | 6–9 | 8–12 | 9–13.5 | 11–16.5 | 12–18.1 |
| Tractor power, kW/HP | 110─160 150─215 | 110─160 150─215 | 120─180 160─240 | 130─190 175─255 | 150─225 200─300 | 200─300 270─405 | 220─320 295─430 | 245─370 330─495 | 280─410 380─550 |
| Working speed, km/h | 10–15 | 10–15 | 10–15 | 10–15 | 10–15 | 10–15 | 10–15 | 10–15 | 10–15 |
| Maximum possible slope, ° | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Tire measurements - for transportation | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 500/50-17 | 520/50-17 | 500/50-17 | 520/50-17 |
| Brakes | - | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits |
| Required pressure, kPa | - | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 |
| Hydraulic connections/pressure, bar | 2 (3) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 | 3 (4) / 200 |
| Number/type of hydraulic connection pairs | 4 (6) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 | 6 (8) / ISO 12.5 |
| Towing | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 | TBZ Category 3 |
| Weight, min., kg | 3 600 | 3 900 | 4 000 | 4 350 | 4 990 | 6 700 | 7 600 | 9 200 | 10 920 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You can rent this equipment!
We offer the possibility of this technique rent for a day, a week or any other time you want. For rental conditions or other land cultivation, sowing, fodder preparation, and fertilization equipment, please contact our technical department.
You may also be interested in:
Popular
Popular
Popular
Popular