Trailed disc harrows for tillage depths up to 16 cm
Disker XL – mounted disc harrows for tilling to a depth of 16 cm
Shallow stubble plowing across the entire working width at a depth of 4 cm, while maintaining a high working speed.
- Working width from 5.2 to 7.2 meters.
- Suitable for use with from 220 AG power technology.
- 620 mm diameter discs Arrange them in two rows, with a 24 cm spacing between discs and an 87 cm spacing between rows of discs.
- Working depth from 4 to 16 cm with intensive mixing.
What Makes the FARMET Disker XL Unique
MONO and TWIN Disc Mounting Systems
The Disker XL is available with either the MONO or TWIN disc mounting system. In the MONO version, each disc is mounted on a separate tine, while in the TWIN version, two discs are mounted on a single tine, allowing you to choose the solution that best suits the soil conditions and the nature of the work.
Optional front attachments
The Disker XL can be equipped with either a Flexi-cut knife roller or a Flexi-board front leveling board. This allows for the efficient shredding of plant residues or the leveling of the soil surface even before the disc section.
Working depth across the entire working width: up to 16 cm
The two-row disc section, featuring aggressive disc geometry, ensures high-quality tillage across the entire working width and intensive incorporation of crop residues to a working depth of up to 16 cm. This ensures that the soil is prepared evenly and that crop residues are distributed throughout the entire tilled layer.
High performance even under challenging conditions
The optimal 17° working angle of the discs, discs ground along the entire perimeter, and a maintenance-free rubber shock absorption system ensure easy penetration into the soil and stable operation even in heavy or dry soil.
Working areas
- Primary soil preparation zone.
- Flexi-cut blade roller – effective shredding of plant residues
- Flexi-board leveling board – leveling the soil surface
- The working area across the entire working width. The two-row disc section, featuring aggressive disc geometry, ensures high-quality tilling across the entire working width and intensive incorporation of plant residues at a working depth of 4–16 cm. At the same time, crop residues are evenly distributed across the soil surface, creating better conditions for their subsequent decomposition.
- Area for breaking up clods and compacting the soil. Optimal soil compaction ensures better water infiltration into the soil and restores soil capillaries, which help moisture rise to the surface layer.
High quality and efficient work
- Fast and efficient stubble plowing to a depth of 4 cm, ensuring that the entire working width is tilled.
- Soil tillage to a working depth of 16 cm with intensive incorporation of plant residues and the option to use front-mounted soil preparation equipment.
- Effective clod breakdown and thorough incorporation of plant residues.
MONO version: One disc is attached to one leg of the plow TWIN version: Two discs are attached to one plow leg
Rigid disk sections The disc sections are protected by rubber shock absorbers (silent blocks). Double-row tapered roller bearings It features high load-bearing capacity and a five-stage sealing system. Maintenance-free rubber shock absorption system The durable, low-maintenance rubber shock-absorption system reliably protects the structure from overloads. Robust transport axle with brakes It is controlled directly from the tractor cab.
Hydraulic working depth adjustment The working depth of the discs can be conveniently adjusted hydraulically directly from the tractor cab. Special deflectors for uniform overlap between adjacent passes Hydraulic Flexi-cut / Flexi-board Control The position of the Flexi-cut knife roller and the Flexi-board leveling board is hydraulically controlled directly from the tractor cab and can be adjusted during operation.
Optimal 17° working angle Ensures high-quality tillage across the entire working width at any working depth. A disc with notches around its entire perimeter Ensures easier penetration into the soil. Optional front attachments Additional front-mounted implements can be installed in front of the tines—choose between the Flexi-cut blade roller or the Flexi-board front leveling board. Micro Drill for sowing small seeds The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Disker 7 XL MONO Disc Mower
Disker 7 XL TWIN Disc Mower
One frame – two wheel mounting systems
Sturdy construction
Easy to use
A cleverly designed machine
Examples of Disker XL disc mower configurations
Flexi-board ironing board Flexi-cut knife roller
Tubular TRS roller Diameter – 600 mm Double roller DR Diameter – 400/350 mm Double Ring Roller DUR (DRR) Diameter – 540/540 mm Roller LTX Diameter – 586 mm Disc roller SDR Diameter – 580 mm V-shaped VR roller Diameter – 600 mm Double V-shaped annular roller DVR Diameter – 550/550 mm The right type of rear roller has a significant impact on the final quality of soil cultivation. The roller compacts the soil, while simultaneously crumbling and leveling it. The type of roller is selected depending on the type of soil and the nature of the machine's use.
K80 Ø 80 mm Micro Drill small seed drill
Initial Soil Preparation
Rollers
Weight – 100 kg/m
Weight – 180 kg/m
Weight – 195 kg/m
Weight – 200 kg/m
Weight – 220 kg/m
Weight – 175 kg/m
Weight – 180 kg/m
Features Tubular TRS roller Double roller DR Double ring roller DRR Roller LTX Disc roller SDR V-shaped VR roller Double V-shaped annular roller DVR
Crushing ●●○○ ●●●● ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Compaction ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●○○ ●●○○ ●●○○
Resistance to clogging ●○○○ ●●●○ ●●●● ●●●○ ●●●● ●●●○ ●●●○
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●●● ●●●● ●●○○ ●●●○ ●●●○ ●●●○
Towing and other optional equipment
| Disker 5 XL | Disker 6 XL | Disker 7 XL | |
|---|---|---|---|
| Working width, mm | 5 200 | 6 200 | 7 200 |
| Transport width, mm | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 2 900 | 3 370 | 4 000 |
| Total length, mm | 7 300 | 7 300 | 7 300 |
| Working depth, mm | 40–160 | 40–160 | 40–160 |
| Number of front discs, pcs. | 21 | 25 | 29 |
| Number of rear discs, pcs. | 21 | 25 | 29 |
| Disc diameter, mm | 620 | 620 | 620 |
| Productivity, ha/hour | 5.2–7.8 | 6.2–9.3 | 7.2–10.8 |
| Tractor power, kW/HP | 160–240 220–330 | 190–285 260–390 | 220–300 300–450 |
| Working speed, km/h | 10–15 | 10–15 | 10–15 |
| Maximum possible slope, ° | 6 | 6 | 6 |
| Tire measurements - for transportation | 19.0/45-17 10.0/75-15,3 | 19.0/45-17 10.0/75-15,3 | 520/50 R17 |
| Brakes | air / 2 circuits | air / 2 circuits | air / 2 circuits |
| Required pressure, kPa | 8,5 | 8,5 | 8,5 |
| Hydraulic connections/pressure, bar | 3 / 200 2 / 200 | 3 / 200 2 / 200 | 3 / 200 2 / 200 |
| Number/type of hydraulic connection pairs | 6 / ISO 12.5 4 / ISO 12.5 | 6 / ISO 12.5 4 / ISO 12.5 | 6 / ISO 12.5 4 / ISO 12.5 |
| Towing | TPH Category 3; lower hook K80; loop Ø 50, 70 mm | TPH Category 3; lower hook K80; loop Ø 50, 70 mm | TPH Category 3; lower hook K80; loop Ø 50, 70 mm |
| Weight, kg | 7 000 | 8 000 | 9 000 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You may also be interested in:
Popular
Popular
Popular
Popular