Popular disc harrows for shallow stubble cultivation up to 13 cm.
SOFTER – mounted and trailed disc harrows for shallow stubble cultivation
Tillage up to 13 cm deep with full-area shaving and mixing
1. Full-area shaving zone. The double disc section with aggressive geometry ensures perfect shaving over the full area at a depth of 3.5 - 13 cm with intensive mixing of plant residues. The disc section also distributes plant residues well over the entire working area.
2. Clump breaking and soil compaction zone. Optimal soil compaction ensures good water infiltration and soil moisture retention.
High quality and efficient work
- Large working speed – up to 15 km/h.
- The cut discs easily penetrate the soil and mix it intensively.
- Disc angle, high pressure force for each disc, ensures uncompromising penetration even in the heaviest or most dry soil and excellent tillage of the soil.
- High quality rubber couplings for optimal disc working angle to support.
- Precise depth support with optimal soil compaction.
1. 510 mm or 560 mm diameter discs arranged in two rows. Working depth 3.5 – 13 cm. Maintenance-free disc mounting points allows the cultivator to be operated without additional lubrication. The optimal geometry of the discs ensures extremely productive, high quality work, when incorporating large amounts of plant waste.
Maintenance-free disc mounting points Maintenance-free rubber joints
Individually height-adjustable side discs
Setting the working depth
Permanent connection of passages
Optional equipment for Softer NS models.
Softer NS mounted disc harrow
1. 510 mm or 560 mm diameter discs arranged in two rows. Working depth 3.5 – 13 cm.
2. Rear roller for breaking up clumps.
Trailed disc harrow Softer PS with Micro Drill
2. Rear roller for breaking up clumps.
3. Optional Micro Drill pneumatic small seed drill.
Cut discs
The 510 mm or 560 mm diameter discs are arranged in two rows. Every disk has protection from stones. Resistant and maintenance-free rubber joints for excellent surface adaptation and overload protection.
Sturdy construction
Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.
High quality materials
Extremely high-quality materials used for the main components guarantee durability. Precisely calculated frame size made of high-strength steel.
Allows the trimmer to be operated without additional lubrication.
For excellent surface adaptation and protection against overloads.
Easy to use
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Diversion of cultivated soil
Upward and longitudinally adjustable deflectors
Setting the working depth
For Softer 4.5 NS and Softer 6 NS mounted models (hydraulic adjustment also available)
For the Softer 3 N hanging model
Setting the working depth
Easy setting of working depth with plates according to the table for trailed models
Individually height-adjustable deflector ensures smooth transition between passes
A cleverly designed machine
One of the biggest advantages is versatility and adaptability, achieving extremely high working speed.
Full perimeter disc edges
Easier penetration of discs into the soil
Constant pressure on the side frames
The Softer 8 and Softer 11 PS models have a compensating hydro accumulator for automatic surface following and constant damping of the side frames.
SynCult slurry applicator
Can be fitted with a pneumatic drill
Sows cover crops or grasses in one pass
Roller VR Weight – 175 kg/m
Weight – 160 kg/m
Weight – 220 kg/m
Tubular roller TRS
Disc Ø 560 mm Disc Ø 530 mm Disc Ø 510 mm Disc Ø 510 mm Disc Ø 510 mm
TPH category II and III TPH category III Towing TPH Category III Eyelet for lower hitch Ø 40 mm, Ø 50 mm, Ø 70 mm K80 Ø 80 mm
2 lines 1 circuit air brakes Hydraulic axle control Weight set – 340 kg Pneumatic seeder for sowing small seeds Support wheels. Double support wheels Hydraulic brakes
Rollers
Diameter – 600 mm
Double roller DVR (for trailed models only)
Diameter – 550/550 mm
Weight – 180 kg/mNot included with Softer 11 PS, Softer 12 PS
Double ring roller DRR (for trailed models only)
Diameter – 540/540 mm
Weight – 195 kg/m
Not included with Softer 11 PS, Softer 12 PS
Ring roller RR
Diameter – 520 mm
Double roller DFR (for trailed models only)
Diameter – 520 mm
Weight – 165 kg/mNot included with Softer 11 PS, Softer 12 PS
Double roller DR
Diameter – 400/350 mm
Weight – 180 kg/m
Disc roller SDR
Diameter – 580 mm
Diameter – 600 mm
Weight – 100 kg/m
Roller LTX
Diameter – 586 mm
Weight – 200 kg/m
Features Tubular TRS roller Double DR roller Ring roller RR LTX Roller Disc SDR Roller V-shaped VR roller
Crushing ●●○○ ●●●○ ●●●○ ●●○○ ●●●○ ●●●○
Compaction ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Resistance to clogging ●○○○ ●●●○ ●●●● ●●●○ ●●●○ ●●●●
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●○○○ ●●○○ ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●●● ●●●● ●●●○ ●●●○ ●●●●
Features LTX Disk SDR VR Dual DVR
Soil crushing ●●○○ ●●●○ ●●●○ ●●●○
Soil pressure (compaction) ●●●● ●●●● ●●●● ●●●●
Depth control ●●●● ●●●● ●●●● ●●●●
Resistance to clogging ●●●○ ●●●○ ●●●● ●●●●
Suitability for rocky soil ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soil ●●●● ●●●● ●●●● ●●●●
Heavy soils ●●●● ●●●● ●●●● ●●●●
Average soils ●●●● ●●●● ●●●● ●●●●
Light soils ●●●○ ●●●○ ●●●● ●●●●
Discs
Hanging/Hitching
(only for Softer 3N model)
(Softer 4.5 NS and Softer 6 NS.
(Optional pins for TPH category 4)
Other optional equipment
For Softer 4.5 PS and Softer 6 PS models
Softer 8 PS and Softer 11 PS in standard configuration
Softer 3 for N model
Not available Softer 4.5 PS,
Softer 11 PS in standard configuration
| SOFTER 2.5 N | SOFTER 3 N | SOFTER 3.5 N FIX | SOFTER 4 N FIX | SOFTER 4.5 NS | SOFTER 5 NS | SOFTER 6 NS | SOFTER 8 NS | SOFTER 4 FIX PS | SOFTER 4 PS | SOFTER 4.5 PS | SOFTER 5 PS | SOFTER 6 PS | SOFTER 8 PS | SOFTER 9 PS W | SOFTER 11 PS | SOFTER 12 PS W | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Type | hanging | hanging | hanging | hanging | hanging | hanging | hanging | hanging | trailed | trailed | trailed | trailed | trailed | trailed | trailed | trailed | trailed |
| Working width, mm | 2 550 | 3 000 | 3 500 | 3 990 | 4 470 | 4 950 | 5 910 | 7 400 | 3 990 | 3 990 | 4 470 | 4 950 | 5 910 | 7 360 | 8 320 | 10 690 | 11 670 |
| Transport width, mm | 2 550 | 3 000 | 3 500 | 4 390 | 3 000 | 3 000 | 3000 | 3 000 | 4 330 | 3 000 | 3 000 | 3 000 | 3 000 | 3 000 | 4 000 | 3 000 | 4 000 |
| Transport height, mm | 1 420 | 1 420 | 1 420 | 1 620 | 2 500 | 2 750 | 3 250 | 4 000 | 1 600 | 2 400 | 2 650 | 2 900 | 3 370 | 4 000 | 4 000 | 4 000 | 4 000 |
| Total length, mm | 2 750 | 2 750 | 2 750 | 2 800 | 2 750 | 2 750 | 2 750 | 2 750 | 6 675 | 6 675 | 6 675 | 6 675 | 6 675 | 6 850 | 6 850 | 6 850 | 6 850 |
| Working depth, mm | 35-130 | 35 - 130 | 35 - 130 | 35-130 | 35 - 130 | 35-130 | 35 - 130 | 35-130 | 35 - 130 | 35-130 | 35 - 130 | 35 - 130 | 35 - 130 | 35 - 130 | 35 - 130 | 35 - 130 | 35 - 130 |
| Total number of disks, pcs. | 20 | 24 | 28 | 33 | 37 | 41 | 49 | 61 | 33 | 33 | 37 | 41 | 49 | 61 | 69 | 89 | 97 |
| Disc diameter, mm | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 |
| Productivity, ha/hour | 2,5-3,8 | 3 - 4,5 | 3,5 - 5,3 | 4-6 | 4,5 - 6,75 | 5-7,5 | 6 - 9 | 8-12 | 4 - 6 | 4-6 | 4,5 - 6,8 | 5 - 7,5 | 6 - 9 | 8 - 12 | 9-13,5 | 11 -16,5 | 12-18,1 |
| Working speed, km/h | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 | 10 - 15 |
| Maximum possible slope (°) | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 11 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Tire measurements - for transportation | no | no | no | no | no | no | no | no | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 400/60-15,5 | 500/50-17 | 520/50-17 | 500/50-17 | 520/50-17 |
| Brakes | no | no | no | no | no | no | no | no | no | air, 2 circuits | air, 2 circuits | air, 2 circuits | air, 2 circuits | air, 2 circuits | air, 2 circuits | air, 2 circuits | air, 2 circuits |
| Weight, min., kg | 1 800 | 1 980 | 1 980 | 2 700 | 3 200 | 3 450 | 3,900 | 4 770 | 3 600 | 3 900 | 4 000 | 4 350 | 4 990 | 6 700 | 7 600 | 9 200 | 10 920 |
| Tractor power, kW/HP | 65-100 / 90-140 | 80-120/110-165 | 90-140/120-190 | 110-160 / 150-215 | 120-180/160-240 | 150-225 / 200-300 | 150-225/200-300 | 200-300 / 270-405 | 110-160/150-215 | 110-160/150-215 | 120-180/160-240 | 130-190/175-255 | 150-225/200-300 | 200-300/270-405 | 220-320/295-430 | 245-370/330-495 | 280-410/380-550 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You can rent this equipment!
We offer the possibility of this technique rent for a day, a week or any other time you want. For rental conditions or other land cultivation, sowing, fodder preparation, and fertilization equipment, please contact our technical department.
You may also be interested in:
Popular