CP series Crushers are designed for crushing and ensiling wet (up to 40% moisture) and dry corn, cereal or legume grains into sleeves or rolls.
4 operations are performed:
crushed grains;
a preservative is added or the crushed mass is moistened;
The crushed mass and preservative are mixed; the mass is pressed into silage sleeves.
Suitable for both individual use on farms and for service providers.
Easily adjustable crushing size when working with various crops.
The possible diameter of the silage sleeve is from 1.2 m to 2.40 m.
The smallest model of the CP series crusher/stuffer, CP Little, is extremely convenient for use on smaller farms
The crusher is intended for use on smaller farms.
Used on farms where threshed grain brought from the fields is immediately crushed and pressed into silage sleeves.
Available tunnels for ensiling into sleeves – 1.5 m or 1.2 m.
Place on the crusher to place the preservative container.
Grain is poured into the crusher hopper with a bucket.
The crushed grain mass is pressed into the silage sleeve by a special screw-shaped device.
Crushed and compressed grain mass of optimal moisture content – from 30% to 40% – must be stored in silage sleeves with maximum protection against air ingress.
Attractive price.
One machine performs 4 operations:
grain crushing;
injection of a preservative onto the crushed mass or wetting the mass;
mixing crushed grains and preservative;
pressing crushed grain into the silage sleeve.
Significant reduction in the costs of processing the harvested crop.
15 t/h capacity, consuming 0.9 l of fuel per 1 ton of product.
The crusher has a low weight of 1820 kg.
One operator is enough to crush and press the grain into the silage sleeve.
Mechanical service brake.
Chassis adapted for road transport. Maximum speed – 20 km/h.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
Crushed grain can be pressed not only into silage sleeves, but also unloaded, for example, into silos.
The crusher's service life can be extended by crushing dry grain all year round.
CP1 Simple – a simplified version of the CP1 grain thresher/stuffer model, designed for medium-sized farms.
The crusher is intended for use on medium-sized farms.
Used on farms where threshed grain brought from the fields is immediately crushed and pressed into silage sleeves.
Available tunnels for ensiling into sleeves – 1.5 m or 1.2 m.
Place on the crusher to place the preservative container.
Grain is poured into the crusher hopper with a bucket.
First, the grains are crushed, selecting the required crushing size.
After crushing the grains, a preservative is injected.
The crushed grain mass is pressed into the silage sleeve by a special screw-shaped device.
Crushed and compressed grain mass of optimal moisture content – from 30% to 40% – must be stored in silage sleeves with maximum protection against air ingress.
Attractive price.
Productivity – up to 20 t/h.
One machine performs 4 operations:
grain crushing;
injection of a preservative onto the crushed mass or wetting the mass;
mixing crushed grains and preservative;
pressing crushed grain into the silage sleeve.
Significant reduction in the costs of processing the harvested crop.
20 t/h capacity, consuming 0.9 l of fuel per 1 ton of product.
The crusher has a low weight of 2030 kg.
One operator is enough to crush and press the grain into the silage sleeve.
Mechanical service brake.
Chassis adapted for road transport. Maximum speed – 20 km/h.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
Crushed grain can be pressed not only into silage sleeves, but also unloaded, for example, into silos.
The crusher's service life can be extended by crushing dry grain all year round.
CP1 – mobile grain crusher/stuffer for use for medium-sized farms or service providers
The crusher is intended for use by medium-sized farms and service providers.
Used on farms where threshed grain brought from the fields is immediately crushed and pressed into silage sleeves.
Available tunnels for ensiling into sleeves – 1.5 m or 2 m.
Grain is poured into the crusher hopper using a screw conveyor or bucket.
First, the grains are crushed, selecting the required crushing size.
After crushing the grains, a preservative is injected.
The final crushed grain mass is pressed into the silage sleeve by a special screw-shaped device.
Crushed and compressed grain mass of optimal moisture content – from 30% to 40% – must be stored in silage sleeves with maximum protection against air ingress.
The CP1 model can be equipped with a Perkins diesel engine, the CP1-M model. The advantage is that a tractor is not required.
Productivity – up to 20 t/h.
One machine performs 4 operations:
grain crushing;
injection of a preservative onto the crushed mass or wetting the mass;
mixing crushed grains and preservative;
pressing crushed grain into the silage sleeve.
Significant reduction in the costs of processing the harvested crop.
up to 20 t/h productivity, consuming 0.9 l of fuel per 1 ton of product.
One operator is enough to crush and press the grain into the silage sleeve.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
Crushed grain can be pressed not only into silage sleeves, but also unloaded, for example, into silos.
Not only grain, but also other silage mass (green corn mass, sugar beet pulp, etc.) and other organic materials can be pressed into the silage sleeves (a special adapter is required).
The crusher's service life can be extended by crushing dry grain all year round.
CP2 – mobile grain crusher/stuffer for use for medium and larger farms or service providers
The crusher is intended for use by medium and larger farms and service providers.
Used on farms where threshed grain brought from the fields is immediately crushed and pressed into silage sleeves.
The possible diameter of the silo sleeves is 1.5 m, 2 m or 2.4 m.
Grain is poured into the crusher hopper using a screw conveyor or bucket.
First, the grains are crushed, selecting the required crushing size.
After crushing the grains, a preservative is injected.
The crushed grain mass is pressed into the silage sleeve by a special screw-shaped device.
Crushed and compressed grain mass of optimal moisture content – from 30% to 40% – must be stored in silage sleeves with maximum protection against air ingress.
If a different mass is pressed, other than grain, the adapter is replaced for pressing a different mass. The replacement is simple and quick.
Productivity – up to 40 t/h.
One machine performs 4 operations:
grain crushing;
injection of a preservative onto the crushed mass or wetting the mass;
mixing crushed grains and preservative;
pressing crushed grain into the silage sleeve.
Significant reduction in the costs of processing the harvested crop.
up to 40 t/h. productivity, consuming 0.9 l of fuel per 1 ton of product.
One operator is enough to crush and press the grain into the silage sleeve.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
Not only grain, but also other silage mass (green corn mass, sugar beet pulp, etc.) and other organic materials can be pressed into silage sleeves.
Crushed grain can be pressed not only into silage sleeves, but also unloaded, for example, into silos.
The life of the crusher can be extended by crushing dry grain all year round. When crushing dry grain, there is no need to change the rollers.
CP2 Plus – mobile grain crusher/stuffer for for preparing large quantities of feed for farms and service providers
The crusher is intended for use by medium and larger farms and service providers.
Used on farms where threshed grain brought from the fields is immediately crushed and pressed into silage sleeves.
The possible diameter of the silo sleeves is 1.5 m, 2 m or 2.4 m.
Grain is poured into the crusher hopper using a screw conveyor or bucket.
Automatic machine control.
Dosing turnstiles are already standard equipment.
Space for two preservative containers.
First, the grains are crushed, selecting the required crushing size.
After crushing the grains, a preservative is injected.
The crushed grain mass is pressed into the silage sleeve by a special screw-shaped device.
Crushed and compressed grain mass of optimal moisture content – from 30% to 40% – must be stored in silage sleeves with maximum protection against air ingress.
If a different mass is pressed, other than grain, the adapter is replaced for pressing a different mass. The replacement is simple and quick.
Extremely high productivity – up to 60 t/h.
One machine performs 4 operations:
grain crushing;
injection of a preservative onto the crushed mass or wetting the mass;
mixing crushed grains and preservative;
pressing crushed grain into the silage sleeve.
Significant reduction in the costs of processing the harvested crop.
up to 60 t/h. productivity, consuming 0.9 l of fuel per 1 ton of product.
One operator is enough to crush and press the grain into the silage sleeve.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
Not only grain, but also other silage mass (green corn mass, sugar beet pulp, etc.) and other organic materials can be pressed into silage sleeves.
Crushed grain can be pressed not only into silage sleeves, but also unloaded, for example, into silos.
The life of the crusher can be extended by crushing dry grain all year round. When crushing dry grain, there is no need to change the rollers.
CP1 LITTLE
CP1 SIMPLE
CP 1
CP 2
CP2 PLUS
Capacity (coarse crushing), t/h
8 - 15
15 - 20
15 - 20
30 - 40
45 - 60
Productivity (fine crushing), t/h
4 - 8
7,5 - 15
7,5 - 15
15 - 30
35 - 45
Baling tunnel diameter, m
1,2 / 1,5
1,2 / 1,5
1,2 / 1,5 / 2
1,5 / 2 / 2,4
1,5 / 2 / 2,4
Hopper capacity, m³
2.8
3.2
3.7
3
3
Required tractor power (min), HP
70
100
100
160
200
Weight, kg
1820
2030
2870
4950
6200
Fuel consumption, l/t
0,7 - 0,9
0,7 - 0,9
0,7 - 0,9
0,7 - 0,9
0,7 - 0,9
Length, mm
4125
4325
5130
4670
6280
Width, mm
1775
1855
2400
2540
2430
Total height, mm
2400
2400
2895
3380
3690
Hopper length, mm
3000
3300
3330
3000
4000
Hopper width, mm
1990
1990
2210
2280
2300
Founded in 1991, the Czech company ROmiLL, in cooperation with the State Research Institute and implementing their projects, began its activities in two areas: feed production technologies and industrial microwave equipment.
ROmiLL The company's mission is scientific research applied in production, development and innovation.
Since 1989, the company has been producing sorting rollers for forage grain crops.
The range of manufactured products is wide – starting from the lowest power and ending with extremely powerful machines intended for farms, companies, and manufacturing plants specializing in feed production. Horizontal mixers are also manufactured. All machines and equipment are manufactured ROmiLL in the company.
ROmiLL also implements projects for the construction of feed production complexes and the installation of separate technological units.
Since 2004, the company has specialized in the field of wet cereal and corn grain processing technology.
In 2005, construction of agricultural production storage and processing complexes began, starting from project preparation and ending with installation work.
The company's products are exported to Germany, Spain, Italy, Ukraine, Russia, Slovakia, Denmark, Belarus, Hungary, France, Estonia, New Zealand, Romania, the Netherlands, Canada, Latvia, and Lithuania.
