Grain crushers M-M2

Reliable grain crushers for crushing both wet and dry grain

For a purchase offer, please fill in the enquiry form or contact the following contacts:

M Series – mobile wet grain crushers with a stainless steel screw conveyor

Capacity: 20–60 metric tons per hour.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
The nutritional value of wet grain ensiled by roller crushing increases due to better digestibility, and production efficiency is also increased.
Cost reduction to 33 Eur/t.
20 t/h output is achieved when working with a 60 HP tractor

Key Features of the ROmiLL M Series Grain Crushers

High productivity for field work

The M Series grain crushers are designed for in-field operation, so they can be loaded directly from a combine or a transfer trailer. Large-capacity hoppers and high-performance models allow for non-stop operation even during peak harvest season. Depending on the model, a single thresher can handle one to three combines.

Lower grain processing costs

When crushing moist grain, there is no longer a need to dry it, which significantly reduces energy consumption and grain preparation costs. Compared to drying, savings of up to 40 euros per metric ton are possible. In addition, the grain can be harvested earlier, without waiting for its moisture content to drop to a level suitable for drying.

Uniform mixing of the preservative

The stainless steel screw conveyor ensures that the preservative is evenly mixed into the crushed grain. This helps maintain feed quality throughout the storage period and creates suitable conditions for long-term storage in silo pits or silo sleeves.

Versatile year-round use

The M Series crushers are suitable for crushing not only moist but also dry grains—there is no need to change the working rollers. The feed texture can be easily adjusted to meet the needs of different livestock groups—from finer grinding to coarser pellets for ruminants. As a result, the equipment can be used year-round for various feed preparation tasks.

Mobile wet and dry grain crusher M1

Perfect for both farms and service providers.
The crusher's capacity is fully sufficient to supply one combine harvester.
The crusher can be used all year round:
- crushing wet grains during harvest;
- used for crushing dry grains.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a screw conveyor, where it is evenly mixed with the crushed mass.
Complete with a horizontal conveyor that includes preservative injection, a vertical conveyor, and an optional hopper that can be used for loading.
The crusher is equipped with a single-axle chassis.
You can choose a stationary model powered by electricity.

M2 – Mobile wet grain crusher with a capacity of 40 metric tons per hour

Intended for use by farms or service providers preparing larger quantities of feed.
Used both in the field and at the ensiling site.
When working in the field, the grain is spread over 9.2 m³ The crusher hopper (with elevation) is filled from the threshing machine or compensation trailers.
The crusher's capacity is fully sufficient to supply two harvesters.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a screw conveyor, where it is evenly mixed with the crushed mass.
4 containers for preservative are placed in the crusher, with a total capacity of 800 l (there is a lifting mechanism for lifting the containers).
Speed on roads: 40 km/h.

M2 Plus – A mobile wet grain crusher with a capacity of 60 metric tons per hour, ideal for companies and large farms

Intended for use by farms, companies, or service providers that prepare large quantities of feed.
Used both in the field and at the ensiling site.
When working in the field, the grain is spread over 10.3 m³ The crusher hopper (with elevation) is filled from the threshing machine or compensation trailers.
The crusher's capacity is fully sufficient to supply two harvesters.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a horizontal screw conveyor, where it is evenly mixed with the crushed mass.
Space for a 2,000-liter container of preservatives.
The speed of the crusher during road transport is 40 km/h.

	M 1	M 2	M2 Plus
Capacity (coarse crushing), t/h	15–20	30–40	45–60
Capacity (fine crushing), t/h	10–15	20–30	30–45
Screw conveyor	is	is	is
Screw conveyor diameter, mm	200	250	300
Hopper capacity, m³	3,5	9,2	10,3
Required tractor power, min., HP	60	120	160
Fuel consumption, l/t	0.4–0.5	0.4–0.5	0.4–0.5
Weight, kg	2 600	5 700	6 300
Length, mm	3 550	5 320	5 919
Width, mm	2 450	2 490	2 450
Width with screw conveyor, mm	3 230	4 966	5 035
Height, mm	2 980	3 623	3 654
Height with screw conveyor, mm	4 875	5 680	4 930
Hopper length, mm	3 200	3 000	3 380
Hopper width, mm	2 135	2 400	2 300

Founded in 1991, the Czech company ROmiLL, in cooperation with the State Research Institute and implementing their projects, began its activities in two areas: feed production technologies and industrial microwave equipment.

ROmiLL The company's mission is scientific research applied in production, development and innovation.

Since 1989, this company has been producing forage grain sorting rollers.
The range of products manufactured by this manufacturer is wide – starting from the lowest power and ending with extremely powerful machines intended for farms, companies, and manufacturing plants specializing in feed production. Horizontal mixers are also produced. All machines and equipment are manufactured ROmiLL in the company.

ROmiLL The company also implements projects to build feed production complexes and install separate technological units.

Since 2004, the company has specialized in the field of wet cereal and corn grain processing technology.

In 2005, the construction of agricultural production storage and processing complexes began, starting from project preparation and ending with installation work.

The company's products are exported to many countries. The equipment is exported to Germany, Spain, Italy, Ukraine, Russia, Slovakia, Denmark, Belarus, Hungary, France, Estonia, New Zealand, Romania, the Netherlands, Canada, Latvia, and Lithuania.