Cultivators with a working width of 2.5–10 meters for working to a depth of 25 cm
XLander Stubble Cultivators – The Evolution of a Unique Implement
Thanks to its wide range of models, the XLander can be adapted to both medium-sized and large farms.
The New XLander The design is based on an exceptionally sturdy axle and a robust central frame. All joints, hinges, and major structural components are made of high-tensile steel.
Another important innovation is the alternating arrangement of short and long tines. Especially in two-row models, this significantly improves the flow of plant residue and reduces the risk of clogging.
XLander It is designed so that it can be equipped with various rear attachments at any time. This makes it a versatile piece of equipment that can be easily adapted to different tasks and working conditions.
All XLander These models can be equipped with different rollers, 2- or 3-row harrows, intermediate blade harrows, or harrows with 16 mm with drill bits and an adjustable working angle. Additionally, you can choose tungsten carbide-coated foot plates.
Unique Features of the Ovlac XLander Stubble Cultivator
100 % Maintenance-Free Stone Protection
XLander uses a system of rubber protective elements with no lubrication points, bushings, or pin connections. This means less maintenance, no play in the mounts, and quieter operation than with traditional spring-loaded systems.
Excellent crop residue permeability
The alternating arrangement of short and long tines creates a „V“-shaped flow, allowing plant residue to move smoothly and preventing the tines from clogging, even when working in fields with a large amount of stubble.
Versatile operation, from shallow tilling to deeper tillage
A wide selection of legs and rear attachments allows the XLander to be adapted for various tasks—stubble plowing, weed control, secondary tillage, or loosening the soil to a depth of 25 cm.
A wide selection of models for different types of farms
Mounted models are available with working widths ranging from 2.5 to 7.35 m, while the trailed GC version is available with working widths ranging from 7 to 10 m. As a result, the XLander can be adapted for both medium-sized and highly productive farms with 250–500 AG tractors.
A wide selection for different needs XLander may be 2 or 3 rows of legs. The working width of the mounted models ranges from 2.5 to 7.35 m, or trailer-mounted GC versions – starting from 7 to 10 years. Therefore, each farm can choose the right one XLander depending on the tractor available, soil conditions, and work requirements. Unlike the previous one Minichisel version, XLander folds into two parts. This design offers several key advantages: the two side sections are connected to an exceptionally sturdy central frame made of high-tensile steel, giving the implement exceptional strength. Folding it into two parts allows you to keep just 2.5 m transport width in models up to 5.75 m working width. Larger than 5.75 m These models are equipped with a central chassis designed for larger loads, so their transport width is 3 m. Features
High productivity for large farms XLander GC Version designed for high-horsepower tractors starting at 250 to 500 AG. Regarding 7.15–10 m working width and up to 10 km/h. Depending on the soil and working conditions, productivity at operating speed can reach as high as 8 ha/hour. One of the most important advantages of this version is that the transport wheels are installed in the working position at the front of the cultivator. Unlike many other mounted cultivators of this type, they ensure precise working depth control even under difficult conditions and do not drive over soil that has already been tilled. It offers even greater convenience two hydraulic memory functions, which control the working depth and the angle of the tines (third-point function). This allows you to return to the preset parameters in a single step after turning around at the end of the field or after adjusting settings at a specific location on the field. Features
Alternating foot placement in the same row prevents the „raking“ effect. On the contrary, plant debris is directed in a diagonal flow, so the implement operates smoothly and does not clog. All foldable versions of the XLander They come standard with a hydraulic lock, ensuring safe transport by road. 30 cm leg curl range of motion allows you to easily navigate obstacles without having to lift the entire rig and without damaging its structure. Ovlac uses time-tested rubber protective components, which retain their mechanical properties for many years and are resistant to weather conditions—cold, sun, and extreme temperatures. The patented design of the upper and lower rubber protective elements, featuring two flanges, prevents them from slipping out of place due to axial forces.
A rubber protection system has many clear advantages. These include 100 % Maintenance-Free System, which does not require lubrication. It has no bushings or pin-based connections, so there is no play in the mounts. In addition, this system operates quietly—unlike traditional spring-loaded legs, which often make noise due to the friction between their moving parts. However, the most important thing is Ovlac XLander MCH Legs Advantage: their operational efficiency. The rubber protective elements are installed at the factory with a special pre-tension, so the legs have a high initial bending force. This offers two main advantages: the legs maintain an optimal angle of attack during movement, and quickly return to their working position after clearing an obstacle. The XLander's leg extension height is more than 30 cm, so obstacles can be cleared without lifting the entire rig and without damaging its structure. Since the implement is designed to operate up to 25 cm In fact, this bending height ensures safe operation even on rocky or difficult terrain. 74 cm clearance under the frame and 86 cm between rows In 2-row patterns, or 63 cm In 3-row models, it ensures excellent passage of plant residues. A wide selection of wear parts allows for XLander adapted to various tasks and the different needs of farms.
Wall-Mounted Model Lineup
Trailer Model Range – GC
Key Benefits
MCH legs – unmatched productivity
Choosing the right attachments is crucial for achieving good results. This depends on the type of soil and the tillage method used. Therefore XLander It can be equipped with a variety of optional accessories that are mounted on the base machine. These accessories can be installed at any time, so if your needs change, XLander It can be easily adapted to new working conditions. The main goal is to XLander could change in line with the farm's needs. Roller The plow ensures reliable control of working depth and helps to properly prepare and compact the soil. Depending on your work needs, you can choose from a wide range of rollers. The roller can be adjusted quickly and easily without any tools. 2- or 3-row rakes 10 mm, 2- or 3-row spring-tine harrows are ideal for leveling the surface after tillage, without further compacting the soil. The hoes bring the roots to the surface, preventing the weeds from re-establishing themselves. Wheel + 10 mm rims This combination brings together the advantages of both attachments: the roller prepares the soil, breaks up clods, and helps maintain the working depth, while the 10-mm tines level the surface. This is a versatile and effective solution for many tillage tasks. Knife-tooth harrows + roller Knife harrows are particularly well-suited for secondary tillage, such as after plowing. They break up clods and create a level surface, while the roller that follows immediately behind them compacts the soil and completes the preparation. Ironing board + roller + rake This combination ensures exceptionally high-quality soil preparation after plowing. The levelling board creates an even soil surface, the roller breaks up clods and compacts the soil across the entire working width, and the harrow effectively removes weeds and leaves a smooth soil surface. Adjustable 16 mm prongs These sturdy, wide-spaced rakes, with 16 mm thick tines that are 85 cm long, are designed for leveling and breaking up soil. The working angle can be adjusted according to soil conditions—choosing between a gentler or more aggressive operation. These harrows are not compatible with a roller. Since every farm operates under different conditions—with variations in soil type, working depth, and the tasks performed— XLander Designed as a versatile tool. When selecting different types of plowshares, they can be used for a variety of tasks: weed control, stubble plowing, deeper soil loosening, and other tillage operations 10–25 cm depth. As a result, XLander It can be used several times per season—from summer stubble plowing to secondary tillage or weed control. All plowshares are designed in collaboration with wear-part specialists and are manufactured from high-quality forged steel, ensuring an excellent balance between price and durability. To ensure that the equipment remains effective throughout its service life, Ovlac wear parts maintain their working width from the first day of use to the last. A special heat treatment significantly increases their wear resistance, allowing them to last longer even during intensive operation in challenging soil conditions. Arrowhead plowshare 288 × 6 mm Working depth: 7 to 20 cm. Ideal for stubble plowing and weed control. Ensures thorough mixing of plant residues and soil. Tillage coulter 275 × 6 mm Working depth: 7 to 15 cm. It is ideal for shallow root cultivation, as it does not alter the soil structure and helps retain moisture in the deeper layers. Double-ended chisel, 400 × 67 × 13 mm Working depth: 7 to 25 cm. Ideal for primary and secondary soil cultivation. Thanks to its optimal penetration angle and the smoothly curved surface around the tine, it ensures easy penetration into the soil and reduces the power requirement. One-piece wing chisel, 288 × 6 mm Working depth: 7 to 10 cm. When used in combination with a double-sided chisel, this wing-shaped coulter is ideal for shallow soil tillage. The aggressive tip of the double-sided chisel ensures reliable penetration even into dry soil, keeping the tine at the working depth, while effectively loosening the compacted soil layer beneath the surface. Double-sided chisel with tungsten carbide inserts, 360 × 60 × 20 mm A double-sided chisel designed for use in highly abrasive, fast-wearing soils. Tungsten carbide inserts increase wear resistance, and the chisel maintains an optimal working angle throughout its service life.
400 or 520 mm toothed ring roller This aggressive roller levels the soil without compacting it. It is particularly well-suited for use in dry conditions—it effectively breaks up clods, loosens compacted surfaces, and shreds plant debris on the soil. Not recommended for use in wet and sticky conditions, especially the 400 mm diameter version. 500 mm V-shaped ring roller It effectively breaks up clods and compacts the soil, leaving a well-prepared surface for sowing. Not recommended for use on stony soils. 3-row 16 mm rake These rakes, with 16 mm thick tines that are 85 cm long and an adjustable angle of attack, work easily even when there is a large amount of plant debris. This harrow cannot be used in combination with a roller. To maintain a precise working depth, it is recommended to use it with a pair of support wheels. 1-row rake They are installed behind the roller, and the best results are achieved when used in combination with a smoothing board. These rakes are perfect for combing out weeds and bringing them to the soil's surface. 480 or 540 mm bar roller A versatile roller suitable for tilling even light or already tilled soils. It prepares the soil surface well without compacting it. It can be used in both dry and wet conditions. It is the simplest and most versatile choice of roller. 10 mm 2- or 3-row rakes Hoes with 10 mm spring tines can be used with or without a roller. They are ideal for leveling the soil and bringing weed roots to the surface. When working with large amounts of plant residues, it is recommended to use them in a floating position. Comparison Table The leveling board is mounted between the legs and the roller. This is the ideal solution for high-quality soil leveling with the 3-row XLander models. A smoothly leveled surface allows the roller to work more efficiently and uniformly across the entire working width. Knife-shaped plowshares They are also mounted between the legs and the roller. These knife-type coulters are recommended for secondary tillage, such as after plowing. They help control weeds and create a finer, smoother soil surface. Maintaining a precise working depth is extremely important, especially when working at shallow depths. Therefore, it is important to select the most suitable support wheels based on the chosen rear attachment (with or without a roller) and soil conditions. 8″ × 18.7″ 16 PR front support wheels Comes standard on models with 21 or more plowshares. It is ideal for use with a roller, especially on dry and stony soils, where it is important to maintain a precise working depth. 8″ × 18.7″ 16 PR side support wheels (optional equipment) Installed on both sides of the XLander, these support wheels are the best choice when the implement is configured without a roller. They are also recommended for models with a working width of up to 5 m, because when the implement is folded, the front wheels do not overlap the tractor's wheels. 2 × 14.5″ 200/60 10 PR front support wheels (optional equipment) It is ideal for use with a roller, especially after plowing, when it is important to maintain a precise shallow working depth. A special tire tread pattern helps prevent clogging when working in wet conditions. Twin front wheels, 200/60 14.5″ 10 PR (optional equipment) These double wheels are recommended for wider models that come with a roller. They are particularly well-suited for wet or loose soils, such as when working after plowing. Since the wheels are positioned on both sides of the machine, they reduce the load on it when working on slopes. These wheels come standard on trailer models. Tires: 560/45 R 22.5″ and 600/40 22.5″ 560/45 R 22.5″ tires come standard on XLander GC models, while 600/40 22.5″ tires are available as an option. In the trailed version, the wheels are located at the rear of the implement during transport and in front of the operator’s feet during operation to maintain the working depth precisely. The wheels are hydraulically adjustable and feature a memory system that allows the machine to return to the preset working depth after turning at the headland.
Wear Parts
Rollers
Support wheels
XLANDER 2-row models for mounting XLANDER 3-row models (suspended) XLANDER 3-row trailer models * The recommended tractor power listed is approximate and depends on the working depth, soil conditions, and other operating factors.
XLANDER-2-9 XLANDER-2-11 XLANDER-2-13 XLANDER-2-13-P XLANDER-2-15-P XLANDER-2-17-P XLANDER-2-19-P XLANDER-2-21-P XLANDER-2-23-P XLANDER-2-25-P XLANDER-2-27-P
Folding - - - In two parts In two parts In two parts In two parts In two parts In two parts In two parts In two parts
Working width, m 2,45 3 3,5 3,5 4 4,6 5,15 5,7 6,25 6,8 7,35
Transport width, m 2,7 3 3,8 2,5 2,5 2,5 2,5 2,5 3 3 3
Recommended tractor power, AG* 70–80 85–100 100-120 100-120 115–135 130–150 140–170 155–190 170–210 185–225 200–250
Weight, kg** 780 860 950 1 500 1 650 1 800 1 950 2 200 2 470 2 630 2 790
Clearance under the frame, cm 74 74 74 74 74 74 74 74 74 74 74
Distance between plowshares, cm* 27 27 27 27 27 27 27 27 27 27 27
XLANDER-3-13 XLANDER-3-14 XLANDER-3-16 XLANDER-3-16-P XLANDER-3-19-P XLANDER-3-22-P XLANDER-3-25-P XLANDER-3-25-PP XLANDER-3-28-P XLANDER-3-31-P
Folding - - - In two parts In two parts In two parts In two parts In two parts In two parts In two parts
Working width, m 3 3,22 3,7 3,7 4,4 5,05 5,75 5,75 6,45 7,15
Transport width, m 3 3,5 4 2,55 2,55 2,55 2,55 3 3 3
Recommended tractor power, AG* 90–105 95–115 110–130 110–130 130–150 155–190 175–225 175–225 195–250 215–280
Weight, kg** 910 960 1 060 1 580 1 900 2 295 2 620 2 690 2 985 3 270
Clearance under the frame, cm 74 74 74 74 74 74 74 74 74 74
Distance between plowshares, cm* 23 23 23 23 23 23 23 23 23 23
XLANDER-3-31-GC XLANDER-3-35-GC XLANDER-3-39-GC XLANDER-3-43-GC
Folding In three parts In three parts In three parts In three parts
Working width, m 7,15 8 9 10
Transport width, m 3 3 3 3
Recommended tractor power, AG* 230–280 240–300 270–350 290–390
Weight, kg** 6 550 6 810 7 070 7 330
Clearance under the frame, cm 74 74 74 74
Distance between plowshares, cm* 23 23 23 23
** The weight is approximate and is listed with a 400 mm toothed ring roller.
The Spanish manufacturer Ovlac has over 75 years of experience in the production of agricultural equipment. Since its inception, the company has specialized in the production of plows. Over the past 15 years, the product range has expanded significantly, but the core line of tillage and cultivation is maintained, in which it applies the accumulated knowledge and experience.
Currently, Ovlac is the largest agricultural producer in Spain, exporting its products to more than 20 countries around the world.
You may also be interested in:
Popular
Cultivators Avaran
6–8-meter model for use after plowing, in minimum tillage, on stubble, and on organic farms
Popular