Grain crushers M-M2

Reliable grain crushers for crushing both wet and dry grain

For consultation or to receive a purchase offer, please contact the following contacts:

Mobile wet and dry grain crushers

20 – 60 t/h capacity.
The coarseness of the crushed mass is changed as needed, depending on whether the feed is prepared for cattle or monogastric animals.
The nutritional value of wet grain ensiled by roller crushing increases due to better digestibility, and production efficiency is also increased.
Cost reduction to 33 Eur/t.
20 t/h output is achieved when working with a 60 HP tractor

Mobile wet and dry grain crusher M1

Perfect for both farms and service providers.
The crusher's capacity is fully sufficient to supply one combine harvester.
The crusher can be used all year round:
- crushing wet grains during harvest;
- used for crushing dry grains.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a screw conveyor, where it is evenly mixed with the crushed mass.
Complete with a horizontal conveyor that includes preservative injection, a vertical conveyor, and an optional hopper that can be used for loading.
The crusher is equipped with a single-axle chassis.
You can choose a stationary model powered by electricity.

M2 – 40 t/h. productivity mobile wet grain crusher

Intended for use by farms or service providers preparing larger quantities of feed.
Used both in the field and at the ensiling site.
When working in the field, the grain is spread over 9 m³ The crusher hopper (with elevation) is filled from the threshing machine or compensation trailers.
The crusher's capacity is fully sufficient to supply two harvesters.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a screw conveyor, where it is evenly mixed with the crushed mass.
4 containers for preservative are placed in the crusher, with a total capacity of 800 l (there is a lifting mechanism for lifting the containers).
Road transportation speed – 40 km/h.

M2 Plus – 60 t/h capacity mobile wet grain crusher, perfect for companies and large farms

Intended for use by farms, companies or service providers preparing larger quantities of feed.
Used both in the field and at the ensiling site.
When working in the field, the grain is spread over 9 m³ The crusher hopper (with elevation) is filled from the threshing machine or compensation trailers.
The crusher's capacity is fully sufficient to supply two harvesters.
A preservative can be injected into the crushed mass or the mass can be additionally moistened with water.
The preservative is injected into a horizontal screw conveyor, where it is evenly mixed with the crushed mass.
Space for a 1000 l preservative tank.
The crusher's road transport speed is 40 km/h.

	M 1	M 2	M2 Plus
Capacity (coarse crushing), t/h	15 - 20	30 - 40	45 - 60
Capacity (fine crushing), t/h	7,5 - 15	15 - 30	30 - 45
Screw conveyor	is	is	is
Screw conveyor diameter, mm	200	250	300
Hopper capacity, m³	3.1	9	9
Required tractor power, min., HP	60	120	160
Fuel consumption, l/t	0,4 - 0,5	0,4 - 0,5	0,4 - 0,5
Weight, kg	2960	5600	6200
Length, mm	3550	5220	5720
Width, mm	2450	2450	2450
Width with screw conveyor, mm	3230	3780	4080
Height, mm	2980	3630	3560
Height with screw conveyor, mm	4875	5680	5580
Hopper length, mm	3200	3000	3000
Hopper width, mm	2135	2400	2400

Founded in 1991, the Czech company ROmiLL, in cooperation with the State Research Institute and implementing their projects, began its activities in two areas: feed production technologies and industrial microwave equipment.

ROmiLL The company's mission is scientific research applied in production, development and innovation.

Since 1989, this company has been producing forage grain sorting rollers.
The range of products manufactured by this manufacturer is wide – starting from the lowest power and ending with extremely powerful machines intended for farms, companies, and manufacturing plants specializing in feed production. Horizontal mixers are also produced. All machines and equipment are manufactured ROmiLL in the company.

ROmiLL The company also implements projects to build feed production complexes and install separate technological units.

Since 2004, the company has specialized in the field of wet cereal and corn grain processing technology.

In 2005, the construction of agricultural production storage and processing complexes began, starting from project preparation and ending with installation work.

The company's products are exported to many countries. The equipment is exported to Germany, Spain, Italy, Ukraine, Russia, Slovakia, Denmark, Belarus, Hungary, France, Estonia, New Zealand, Romania, the Netherlands, Canada, Latvia, and Lithuania.

You may also be interested in:

Romil

Grain crushers CP

Grain crushers for crushing into sleeves for both wet and dry grains