Popular

The working depth of up to 18 cm ensures deep cultivation and intensive mixing.

It perfectly levels the soil, therefore it is widely used for pre-sowing soil cultivation, when extremely good field leveling and high-quality cultivation are required.

The mounted disk harrow Diskomat N has a very wide range of applications in various tillage technologies.

The massive 62 cm diameter discs make it ideal for shaving plant residues

Disk harrows Diskomat N

Mounted disc harrows for scythes up to 18 cm with intensive mixing

For consultation or to receive a purchase offer, please contact the following contacts:

Mounted disc harrow Diskomat N has a very wide range of applications in various tillage technologies

The massive 62 cm diameter discs make it ideal for shaving crop residues, especially corn, while the working depth of up to 18 cm ensures deep cultivation and intensive mixing.

1. Full-area shaving zone. The two-row aggressive geometry disc section ensures perfect shaving over the full area at a depth of 6-18 cm with intensive mixing of plant residues. The disc section also distributes plant residues well over the entire working area.

2. Deflectors behind the discs increase soil compaction and incorporation of crop residues.

3. Clump breaking and soil compaction zone. Optimal soil compaction ensures good water infiltration and soil moisture retention.

High productivity and high quality of work

High working speed – up to 15 km/h.
High frame clearance – The scythe does not clog.
Optimal disc inclination – great shave all over.
Cut discs easily penetrates the soil and mixes it intensively.
Maintenance-free spring disc protection – optimal working angle of the discs.
Precise depth support with optimal soil compaction.
Suitable for both for stubble cultivation up to 18 cm depth, as well as for other soil preparation work.
Perfectly levels the soil, therefore widely used for pre-sowing soil cultivationwhen needed very good field leveling and quality cultivation.

Diskomat 3 N

1. 620 mm diameter discs arranged in two rows. Working depth 6–18 cm. Behind each row of discs there is a deflector against which the flying clods hit.
2. The clods are broken up by the rear roller.

One of the main advantages of the design is effective surface leveling after tillage.

A big advantage of this cultivator's design is its good leveling effect on the ground surface, which makes the disc cultivator perfect for for pre-sowing soil preparation, where the most important requirements are even surface leveling and quality work result.

Compact dimensions, light weight

The Diskomat disc harrow stands out unique overall structural and design solution, as well as the implementation of individual technical units and the application of special material technologies. Such a solution ensures very compact dimensions (especially important when driving on public roads), very light weight and its optimal distribution on the working part. In addition, the machine is characterized by very low maintenance requirementsThe design complies with safety requirements and public traffic regulations required for operation on public roads.

Low maintenance requirements

Great attention is paid to the overall design and ergonomics of the machine. All adjustment units are easily accessible to the operator and meet strict safety requirements. The mower is characterized by extremely low maintenance requirements. Compared to other similar devices on the market, the number of lubrication points and the frequency of lubrication are significantly reduced – Most components require absolutely no maintenance throughout the entire service life of the machine.

Sturdy construction

Used for production extremely strong materials combined with eXtra STEEL LINE technology guarantees a long service life even in the most difficult working conditions.

The use of particularly high-quality materials for working parts ensures a long service life.
Maintenance-free spring protection

Protection for each disc

Each disc has individual protection, which ensures reliable protection of the working part and high throughput of plant residues.

Maintenance-free bearings

Robust disc bearings ensure reliable operation of the cultivator even in the most difficult conditions.

Maintenance-free spring protection

The wide working area ensures stability. Durable and maintenance-free spring guard with high release force.

Easy to use

Minimal number of adjustable and lubricated points, so maintenance is extremely easy.

Minimum number of adjustable seats.
Minimum number of places to apply.
There is no need to adjust the angles of the discs or change their position.

Working depth adjustment
Simple setting of the working depth using a pin.

Height-adjustable side deflector
The height-adjustable side deflector ensures optimal distribution of the processed soil.

A cleverly designed machine

One of the biggest advantages is versatility and adaptability, providing great work versatility.

Maneuverable in the fields due to its short and compact design.
Very good self-cleaning properties between the discs.

Deflectors

Deflectors behind each row of discs for deflecting and crumbling the soil.

Two types of deflectors

Two types of deflectors are available: grille type and strip type.

Full-perimeter sharpened disc

Detail of the design of the forged disc lever and the disc sharpened around the entire perimeter.

Micro Drill for sowing small seeds
The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.

Rollers

Tubular TRS roller
Diameter – 600 mm
Weight – 100 kg/m

Double DR roller

Diameter – 400/300 mm

Weight – 135 kg/m

Ring roller RR

Diameter – 520 mm

Weight – 160 kg/m

Roller LTX

Diameter – 586 mm

Weight – 200 kg/m

Disc roller SDR

Diameter – 580 mm

Weight – 220 kg/m

V-shaped VR roller

Diameter – 600 mm

Weight – 175 kg/m

	Tubular TRS roller	Double DR roller	Ring roller RR	LTX Roller	SDR disc roller	V-shaped VR roller
Crushing	●●○○	●●●○	●●●○	●●○○	●●●○	●●●○
Compaction	●●●○	●●●○	●●●●	●●●●	●●●●	●●●●
Depth support	●●●○	●●●●	●●●●	●●●●	●●●●	●●●●
Resistance to clogging	●○○○	●●●○	●●●●	●●●○	●●●○	●●●●
Suitability for rocky soils	●●●○	●●●○	●●●○	●●●○	●●●○	●●●○
Suitability for wet soils	●○○○	●●○○	●●●●	●●●●	●●●●	●●●●
Suitability for heavy soils	●●○○	●●●●	●●●●	●●●●	●●●●	●●●●
Suitability for medium soils	●●●○	●●●●	●●●●	●●●●	●●●●	●●●●
Suitability for light soils	●●●●	●●●●	●●●●	●●●○	●●●○	●●●●

Working tools

Disc Ø 620 mm

Other optional equipment

Micro Drill small seed drill

	Diskomat 3 N	Diskomat 3.5 N FIX
Type	hanging	hanging
Working width, mm	3 000	3 500
Transport width, mm	3 000	3 500
Transport height, mm	1 600	1 600
Total length, mm	3 300	3 300
Working depth, mm	60–180	60–180
Number of discs – front row, pcs.	12	14
Number of discs – rear row, pcs.	12	14
Disc diameter, mm	620	620
Productivity, ha/hour	3–4.5	3.5–5.25
Tractor power, kW/HP	105–158 140–165	120–180 160–240
Working speed, km/h	10–15	10–15
Maximum working slope, °	6	6
Tractor hitch	TPH Category 3	TPH Category 3
Weight, kg	2 400	2 600

FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.

Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.

FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.