New series of 4-7 hull ploughs for tractors up to 350 HP
XPerience plough: innovative tillage technology
The right plough model for your tractor power. The robust construction makes this plough stand out in terms of both reliability and appearance.
Two working versions are available:
- In Vaga (Std) - 130, 150 and 180 series, suitable for tractors from 140 to 300 HP.
- Beyond the furrow (OL) - 180 series, suitable for tractors from 175 to 350 hp.
The plough is available in a wide range of configurations:
- Blocks 4, 5, 6 or 7 - for optimum productivity.
- Mechanically or hydraulically adjustable working width - for ideal adaptation to different soil conditions.
- Safety bolt or hydraulic Auto Reset system - Choice for light, stony or heavy clay soils.
Designed to combine simple operation, reliability and high quality ploughing, this plough delivers outstanding tillage results.
Benefits of the Ovlac XPerience plough
Better adaptation to the terrain
The oscillating linkage system with central pivot allows the plough to automatically adapt to the tractor's movement and working conditions. The plough maintains a straight pull without complex adjustments, reducing side loads and fuel consumption. Automatic levelling takes place without operator intervention and the system locks into a central position during transport.
Reliable protection in all conditions
You can choose between the cut-off screw or the hydraulic Auto Reset protection, depending on soil conditions. The hydraulic system allows non-stop work - the bodies rise and fall back into place when an obstacle is overcome, and the pressure can be adjusted from the cab. The pivot bolt system is simple, low maintenance and efficient in light soils.
Maximum productivity with adjustable width
Mechanical or hydraulic working width adjustment allows you to adapt the plough precisely to different soil conditions. The hydraulic Varilabor system allows you to change the working width directly from the cab (23-57 cm per body), making the most of the tractor's power and adapting easily to the shape of the field.
Parallel copy attachment system
The parallelogram system ensures precise adjustment of the width of the first furrow and stable plough operation. It allows easy adaptation to different conditions and maintains consistent ploughing quality. Adjustment can be mechanical or hydraulic, and the system ensures simple operation and precise results in every field.
High quality and efficient work
- 5 different hull types with top quality wear parts.
- Robust tipping axle, frame without welds.
- The wheel position can be quickly changed, the wheel can be either at the back or in another place.
- Ultra-compact design for working in tight spaces.
- Parallel copying coupling system, allowing mechanical or hydraulic change of the first hull grip during travel.
- Hydraulic protection.
- Hollow shaft for greater strength and durability, allowing optimal routing of hydraulic hoses.
- Automatic oscillating coupling system - for better adaptation to the terrain.
- Distance between enclosures: 85, 95 or 105 cm.
- Under-frame clearance: 72, 78 or 90 cm.
- Reinforced frame with HEL steel plates for greater load resistance.
- Expandable design allowing the addition of an extra hull (depending on model).
The Ovlac XPerience series of ploughs consists of three models - three different frame designs, designed to always offer the optimum option for the tractor's available power and the working conditions in the field.
Ovlac XPerience ploughs can be equipped with two different protection systems, depending on the working conditions in the field. XPF / XPFV bolt-on security system High working rigidity and even 3 300 kg load at the tine allows the bolt to be cut accurately under excessive load. The robust design avoids frequent screw breakages. For low weight and minimal maintenance requirements, This system provides a very good cost per hectare without sacrificing the quality of the ploughing. Result: stable ploughing, easy adjustment and high working efficiency on light or stony soils. Hydraulic (Auto reset) protection system XPH / XPHV Each hull rises when it encounters an obstacle and immediately returns to its working position. This allows you to work without interruption and avoid changing screws even in the most difficult conditions. Variable pressure, Operated directly from the tractor cab, it allows the operator to instantly adjust the protection to the soil hardness, protecting both the plough and the quality of the plough. On heavy soils, the higher pressure (1 400 kg at the tine and 1 050 kg with additional XLight housing) ensures full penetration, while on stony soils the lower pressure allows stones to pass through without being brought to the surface. In case of extremely high loads, the Auto Reset enclosure is additionally equipped with protection of the cut-off bolt, which provides additional safety in difficult conditions (3 800 kg at Norag). Nitrogen accumulator acts as a shock absorber, absorbing shocks together with hydraulic dampers. Meanwhile forged double-hinged drawbar mechanism provides both lateral and vertical recline for ideal adaptation to a wide range of working conditions.
Mechanical working width adjustment XP All Ovlac XPerience ploughs allow you to adjust the working width at any time according to the soil conditions or the type of work you want to do. XP models (XPF and XPH) have adjustable working width mechanically, by changing the position of the bracket screwed to the frame. This system provides a choice of four working width settings, in 5 cm increments. Automatic memory system: The entire range of Ovlac XPerience ploughs comes as standard with an automatic memory system that reduces the frame width to a minimum before driving. This ensures a smooth turn around and prevents the last body from touching the ground. After the manoeuvre, the plough automatically returns to the previously set working width. Hydraulic working width adjustment XP-V XP-V models (XPFV and XPHV) come standard with Ovlac „Varilabor system, allowing evenly variable working width. The working width can be hydraulically adjustable directly from the tractor cab, from 23 to 57 cm per housing, providing the following key benefits:
„Varilabor system durability „Varilabor XP-V models have housing holders bolted to the frame, which avoids weakening the frame through unnecessary welds. It also allows quick change of brackets in the event of a breach or accident. In addition, these brackets movement points located outside the frame, thus reducing the risk of long-term metal fatigue. All connection points shall cemented (hardened) bushings and lubrication points, for wear protection and long-term reliability. The drawbar system is mounted close to the main frame, within the overall dimensions of the plough, and its robust and compact design guarantees the Varilabor system's exceptional durability and reliable performance over many years. Ovlac XPerience ploughs oscillating coupling system with central pivot. The plough is pulled from a central point, allowing it to move freely and adapt to the movement of the tractor, automatically maintaining the optimum balance between pressure on the coulter and the field board. This eliminates the need for complex additional settings once the plough has been properly adjusted - the plough always pulls straight and steady, following the tractor perfectly. Melting takes place automatically, without operator intervention. In addition, on models with hydraulic working width adjustment, the oscillating coupling system automatically compensates for width changes - work is made as simple as possible. When the plough is raised for transport or gating, the cross shaft automatically locks in the central position. This system also facilitates coupling to the tractor. In addition to the advantages of working comfort, the oscillating coupling system Significantly reduces loads on the entire plough structure and helps reduce fuel consumption.
130 series (in the furrow)
150 series (in the furrow)
Series 180 (on and off the furrow)
Security systems
Variable working width
Oscillating coupling system - automatic levelling
Ovlac offers five different types of plough bodies, allowing you to choose the optimal solution for your specific ploughing technology and soil type. All original Ovlac nuts (except tape and plastic) are 8 mm thick and processed in a unique Cementing (Case-Hardening) process, which results in a surface hardness of more than 62 HRC, while maintaining a softer inner layer to protect against fractures. This technology not only ensures long wear time, but also creates smooth surface, which improves ground slip, reduces sticking and allows you to work more efficiently. V-34: a universal spindle for all soil types. Ensures good soil turning with low tractor power requirements. Suitable for working at a depth of 15-35 cm. V-97: a universal spindle for all soil types. Designed to work with very low tractor power requirements. Working depth: 15-30 cm. V-L0V: a feather pusher. Suitable for work in sticky soils. All wear parts are secured with tapered screws for increased service life. V-90: Forms a wide furrow, so it is recommended for tractors with very wide tyres (up to 760 mm). The extended design ensures very good soil turning, while the power requirement remains similar to that of the V-34. V-PLAST: plastic nutcracker for very sticky, non-rocky soils. It has the same geometry as the V-90 or V-97 bodies, ensuring similar performance under different conditions. Possible wide choice of optional equipment, allowing you to adapt the XPerience plough to the job at hand and to different soil conditions. Counterflow: the ideal solution when working with heavy crop residues (e.g. maize), helping to reduce the risk of blockages.
Pre-plough for grass
Counterflow for large volumes of crop residues Extension for the stepladder Hydraulic adjustment of the first furrow width (standard equipment in the OL version). Oscillating coupling system with shock absorption (standard on OL 180). Body knife Outdoor board wear plate Spring-loaded protection for smooth or serrated disc knives. Smooth or serrated disc knives. Foldable alarm system for outdoor use. X-Light frame - 25 kg lighter than standard (max: 32 hp per housing). Ovlac XPerience ploughs can be equipped with different types of wheels: depth control or Combination wheels (for depth control and transport). Rear wheels ensures optimum plough balance and better weight transfer to the tractor during ploughing. Front wheels recommended when working close to field boundaries or obstacles. They also reduce the loads on the tractor's suspension arm system during transport and gating, as the centre of gravity is closer to the tractor. Rear support wheel 200/60-14.5“ Hydraulic rear support wheel 280/70-16“ Rear support and transport wheel 340/16“ Front (Advanced) support wheel 250/65-14.5“ Front (Advanced) support and transport wheel 340/55-16“ Front (Advanced) hydraulic support and transport wheel 340/55-16“ The range of hydraulic wheels includes upper and lower cylinders, together with restriction cartridges. The front wheels are moved forward to fit completely within the frame width.
Translations
Other optional equipment
Wheels
130 SERIES. Frame 150×100 mm. Maximum tractor power: 200 HP SERIES 150. Frame 150×150 mm. Maximum tractor power: 250 HP 180 SERIES. Frame 150×150 mm. Maximum tractor power: 300 HP SERIES 180 (behind the furrow). Frame 150×150 mm. Maximum tractor power: 350 hp
XP 4-EXT XPV 4-EXT XP 5 XPV 5
Working width adjustment mechanical hydraulic mechanical hydraulic
Protection shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic
Working width, cm 140-200 120-200 175-250 150-250
Distance between housings, cm 85 / 95 / 105 85 / 95 85 / 95 / 105 85 / 95
Ground clearance, cm 72 / 78 / 90 72 / 78 72 / 78 72 / 78
Weight, kg 1585 / 1665 1680 / 1760 1755 / 1855 1915 / 2015
Tractor power, HP 120-160 120-160 150-200 150-200
XP 4-EXT XPV 4-EXT XP 5 XPV 5
Working width adjustment mechanical hydraulic mechanical hydraulic
Protection shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic
Working width, cm 140-200 120-200 175-250 150-250
Distance between housings, cm 85 / 95 / 105 85 / 95 85 / 95 / 105 85 / 95
Ground clearance, cm 72 / 78 72 / 78 72 / 78 72 / 78
Weight, kg 1670 / 1750 1795 / 1875 1850 / 1950 2050 / 2150
Tractor power, HP 120–180 120–180 150-250 150-250
XP 5-EXT XPV 5-EXT XP 6 XPV 6
Working width adjustment mechanical hydraulic mechanical hydraulic
Protection shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic
Working width, cm 175-250 150-250 210-300 180-300
Distance between housings, cm 85 / 95 / 105 85 / 95 / 105 85 / 95 85 / 95
Ground clearance, cm 72 / 78 / 90 72 / 78 72 / 78 72 / 78
Weight, kg 1860 / 1960 2150 / 2250 2040 / 2160 2405 / 2525
Tractor power, HP 150-250 150-250 180-300 180-300
XP 5-EXT-OL XPV 5-EXT-OL XP 6-OL XPV 6-OL XP 6+1-OL XPV 6+1-OL
Working width adjustment mechanical hydraulic mechanical hydraulic mechanical hydraulic
Protection shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic shear bolt / hydraulic
Working width, cm 175-250 150-255 210-300 180-306 245-350 210-350
Distance between housings, cm 85 / 95 / 105 85 / 95 85 / 95 85 / 95 85 / 95
Ground clearance, cm 72 / 78 72 / 78 72 / 78 72 / 78 72 / 78
Weight, kg 2050 / 2150 2340 / 2440 2230 / 2350 2595 / 2715 2580 / 2700
Tractor power, HP 175-250 175-250 210-300 210-300 245-350
The Spanish manufacturer Ovlac has over 75 years of experience in the production of agricultural equipment. Since its inception, the company has specialized in the production of plows. Over the past 15 years, the product range has expanded significantly, but the core line of tillage and cultivation is maintained, in which it applies the accumulated knowledge and experience.
Currently, Ovlac is the largest agricultural producer in Spain, exporting its products to more than 20 countries around the world.
You may also be interested in:
SS/SL series of trailed ploughs
Trailed ploughs up to 9 hulls with mechanical or hydraulic protection
