A heavy-duty combination mower that combines the advantages of disc and tine mowers in a single pass
Triton Heavy combination cultivator Combines the advantages of disc and tine cultivators in one pass
Full-depth tillage with zone tillage up to 40 cm deep.
- Working width from 3 to 6.6 meters.
- Suitable for use with from 270 hp power technology.
- 620 / 680 mm diameter discs Arrange them in two rows, with a 42 cm spacing between discs and a 95 cm spacing between rows of discs.
- Working depth of the discs from 18 to 21 cm.
- Forks Arranged in two rows, with a 42 cm spacing between the tines and a 128–239 cm spacing between the rows of tines.
- Working depth of the tines up to 40 cm.
Key Features of the FARMET Triton Heavy
Aggressive tire tread pattern
The Triton Heavy stands out for its aggressive geometry and full-edge-ground discs, which ensure excellent penetration even into hard and dry soil. The 620/680 mm diameter discs, arranged in two rows, effectively cut through the entire soil surface, chop plant residues, and evenly incorporate them into the tilled layer.
Application of granular fertilizer
The Triton 410 P FIX HEAVY Fert+ model can not only till the soil in a single pass, but also precisely apply granular fertilizer at two different depths. One portion of the fertilizer can be applied deeper, into the lower part of the tilled soil, while the other can be applied closer to the surface, where it is more readily available to plant roots.
Wide selection of working sections
A wide selection of working sections allows the mower to be adapted to different soil conditions and work requirements. Various section options are available, including solutions with hydraulic protection, which allow for efficient operation on both lighter and heavier or stony soils.
3-year warranty
All Farmet equipment comes with a 3-year warranty. The company pays particular attention to the high quality and reliability of its machinery. This commitment reflects the company's long-standing philosophy based on precision machining, durability and long service life.
Working areas
- The entire surface treatment area. A double row of discs with aggressive geometry ensures perfect surface-level tillage to a maximum depth of 18/21 cm, thoroughly mixing plant residues. The disc section also evenly distributes plant residues across the soil surface.
- Deep tillage zone. Cultivation depth up to 40 cm. Tines arranged in two rows with optimized geometry ensure deep, zone-specific cultivation, which improves water penetration.
- Stolen goods ironing area. Comparative discs also enhance the incorporation of plant residues.
- Crushing and compaction zone. Optimal soil compaction ensures good water penetration and moisture retention.
High quality and efficient work
- Great solution for heavy soils
- Low traction requirement
- High permeability of soil and plant residues
- Effective shaving and uniform mixing of crop residues in the tilled soil layer
- Deep zone cultivation with minimal clumping
Based on needs, You can choose from a wide range of plows and discs, change the plow body or hitch, or add a hopper for grain.
Triton 410 P FIX HEAVY Fert+ Fertilizer placement at different depths Fertilizer placement at different depths
Deep zonal loosening with partial mixing The plow shares, with their optimized geometry, ensure deep zone tillage, which improves water infiltration into the soil. Ploughing without mixing soil layers The No-Mix Tine is ideal for breaking up compacted soil layers and restoring water absorption in waterlogged fields without actively mixing the soil layers.
Plows for tilling soil to a depth of 35 cm Plows for tilling soil to a depth of 40 cm Plows for deep tillage up to 40 cm deep, without mixing soil layers
Extremely durable materials Extremely strong, high-quality materials are used for the production of working parts. The frame is precisely sized and made of high-strength steel. Massive disk partitions Very high release force due to massive disc sections. Extra durability of working parts To further extend the service life, the upper part of the tine can be additionally reinforced with sintered carbide plates or hardfacing. Leveling disc protection Durable and maintenance-free protection for leveling discs. Maintenance-free bearings The maintenance-free disc arrangement ensures that the cultivator operates without additional lubrication. Massive transport axle with brakes For safe and fast transportation of the tractor.
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Hydraulic adjustment of the working depth of the disc section Easy and quick adjustment of the working depth of the discs by adjusting the washers on the hydraulic cylinder. Working depth adjustment Simple setting of working depth by adjusting the hydraulic cylinder washers on the rollers. Hydraulic tine working depth adjustment when working without rear rollers Easy setting of working depth by adjusting the axle hydraulic cylinder washers when working without rear rollers. Hydraulic adjustment of levelling discs Easy and quick disc adjustment from the comfort of the tractor cab. Adjustment of the left side deflector Simple adjustment of the side deflector using a pin, ensuring a seamless transition between passes. Adjustment of the right side deflector Simple adjustment of the side deflector using a pin, ensuring a seamless transition between passes. Setting the side leveling discs The side leveling discs are easily adjusted with a pin, ensuring precise connection of passes.
One of the biggest advantages is versatility and adaptability, providing great work versatility. Micro Drill small seed drill The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Triton 300 P Heavy
Triton 660 PS Heavy
A shaver designed using a modular system
Possibility of fertilizing with granular fertilizers
Two types of tillage
Working tools
Sturdy construction
Easy to use
A cleverly designed machine
Examples of Triton Heavy combination mower configurations
75 MULTICARBIDE PRO Chisel width: 75 mm 75 MULTICARBIDE PRO Chisel width: 75 mm 75 MULTICARBIDE Chisel width: 75 mm 75 CARBIDE Chisel width: 75 mm 75 CARBIDE 55 CARBIDE for loosening without mixing. Chisel width: 55 mm 55 CARBIDE 50 MULTICARBIDE PRO Chisel width: 55 mm 40 CARBIDE Chisel width: 40 mm Disc Ø 620 mm Disc Ø 680 mm
Double ring roller DRR Diameter – 680/680 mm Roller LTX Diameter – 586 mm Disc roller SDR Diameter – 580 mm Double studded roller DSR Diameter – 760/570 mm V-shaped VR roller Diameter – 600 mm Double V-shaped annular roller DVR Diameter – 680/680 mm The right type of rear roller has a significant impact on the final quality of soil cultivation. The roller compacts the soil, while simultaneously crumbling and leveling it. The type of roller is selected depending on the type of soil and the nature of the machine's use.
TPH Category 3 The pins can be replaced with category 4 TPH. K80 Ø 80 mm Swivel hitch eye Ø 50 mm, Ø 70 mm
Electro-hydraulic flow distributor Divides one tractor hydraulic circuit into three separate circuits. Micro Drill small seed drill Plows for tilling soil to a depth of 35 cm Plows for tilling soil to a depth of 40 cm Plows for deep tillage up to 40 cm deep, without mixing soil layers
Working tools
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +200-500 %
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +200-500 %
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +150-400 %
Chisel thickness: 15 mm
Chisel strength: up to 55 HRC
Carbide plate strength: up to 92 HRA
Usage time: +100-200%
Chisel thickness: 20 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Service life: +200–500 %
Chisel thickness: 25 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Rollers
Weight – 195 kg/m
Weight – 200 kg/m
Weight – 220 kg/m
Weight – 185 kg/m
Weight – 175 kg/m
Weight – 190 kg/m
Double ring DRR roller LTX roller SDR disc roller Double studded roller DSR V-shaped VR roller Double roller DVR
Crushing ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Compaction ●●●● ●●●● ●●●● ●●●○ ●●●● ●●●●
Depth support ●●●● ●●●● ●●○○ ●●●● ●●○○ ●●○○
Resistance to clogging ●●●● ●●●○ ●●●● ●●●● ●●●○ ●●●○
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●○○ ●●●● ●●●○ ●●●○ ●●●○
Towing
Other optional equipment
| Triton 300 P HEAVY | Triton 410 PS HEAVY | Triton 410 P FIX HEAVY Fert+ | Triton 490 PS HEAVY | Triton 580 PS HEAVY | Triton 660 PS HEAVY | |
|---|---|---|---|---|---|---|
| Working width, mm | 3 000 | 4 100 | 4 100 | 4 900 | 5 800 | 6 600 |
| Transport width, mm | 3 000 | 3 000 | 4 100 | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 1 950 | 3 000 | 3 000 | 3 400 | 3 800 | 4 000 |
| Total length, mm | 8 500 | 9 500 | 9 500 | 9 500 | 9 500 | 9 500 |
| Hopper capacity, l | - | - | 5 000 | - | - | - |
| Fertilizer rate, kg/ha | - | - | 70─300 | - | - | - |
| Discs, pcs. | 14 | 20 | 20 | 24 | 28 | 32 |
| Rows of discs, pcs. | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between disc rows, mm | 950 | 950 | 950 | 950 | 950 | 950 |
| Disc diameter, mm | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 |
| Distance between discs, mm | 420 | 420 | 420 | 420 | 420 | 420 |
| Maximum working depth of discs, mm | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 |
| Tines, pcs. | 7 | 9 | 9 | 11 | 13 | 15 |
| Number of tine rows, pcs. | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between tines, mm | 420 | 420 | 420 | 420 | 420 | 420 |
| Distance between tine rows, mm | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 |
| Maximum working depth of the tines, mm | 400 | 400 | 400 | 400 | 400 | 400 |
| Frame clearance, mm | 920 | 920 | 920 | 920 | 920 | 920 |
| Diameter of leveling discs, mm | 460 | 460 | 460 | 460 | 460 | 460 |
| Productivity, ha/hour | 2.4─3.6 | 3.3─4.9 | 3.3─4.9 | 3.9─5.9 | 4.6─7.0 | 5.4─7.9 |
| Tractor power, kW/HP | 155─260 210─355 | 220─290 300─395 | 220─290 300─395 | 260─340 355─460 | 310─400 420─545 | 350─480 475─655 |
| Working speed, km/h | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 |
| Brakes | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit |
| Required pressure, kPa | 5,5 | 5,5 | 5,5 | 5,5 | 5,5 | 5,5 |
| Hydraulic connections/pressure, bar | 5 (3) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 |
| Weight, kg | 5 300 | 9 000 | 10 000 | 9 900 | 11 200 | 12 100 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.