Shallow ploughing to a depth of 8-20 cm allows optimum coverage of large plant residues

Mini-F shallow ploughs

Shallow ploughs combine the advantages of traditional ploughing and minimum tillage

For a purchase offer, please fill in the enquiry form or contact the following contacts:

Shallow ploughs Mini-F

The Ovlac Mini-F plough is designed to combine the benefits of conservation tillage with soil turning.

By listening to the needs of the market and drawing on 90 years of manufacturing experience, Ovlac has developed a plough that can to turn the soil over completely without moving it more than 20 cm deep.

Result - MINI shallow plough, a specialised solution that provides:

high productivity,
low fuel consumption,
effective weed control.

Advantages of the Ovlac Mini-F plough

Shallow ploughing with full reversal

Shallow ploughing with full inversion MINI-F

The Mini-F allows full soil tilting at a depth of only 8-20 cm. This preserves the fertile top layer, keeps the soil structure intact and reduces unnecessary mixing of deeper layers. The perfect solution for farms seeking a balance between conventional ploughing and conservation tillage.

Reduced soil compaction

The Mini-F plough works on-land when the tractor is not on the track. This avoids soil compaction at the bottom of the furrow and allows the use of wider or dual tyres for better traction. All the soil compacted before the plough is immediately tilled away, leaving no dense layers and preserving soil structure.

High performance and low fuel consumption

Thanks to its shallower working depth and lower soil resistance, the Mini-F allows faster and more economical work. Reduced loads reduce fuel consumption and increase productivity, especially in larger areas.

Adapting to different conditions

With a choice of different protection systems (lynch or hydraulic), different tines and optional equipment, the plough can be adapted to the exact soil type and working conditions. This ensures stable operation on both light and heavier soils.

High quality and efficient work

Shallow ploughs combine the advantages of traditional ploughing and minimum tillage.
Shallow ploughing 8-20 cm depth allows for optimum coverage of large plant residues.
Effective weed control with large swaths.
Automatic obstacle protection: lingual or hydraulic.
High ground clearance and reliable frame construction.
Working width - up to 4,2 m.
Lower power requirements allow for a wider working width.
Extremely high productivity and fewer trips are achieved.
The housing design with reversible chisels guarantees minimal wear.
Hydraulic folding - transport width only 3 m.
Eco Plus enclosures with 8 mm with shanks and chisel tines.

For those looking for a traditional, non-translatable plough, Ovlac offers models Mini BF and Mini HF:

Mini BF - with ling automatic barrier protection
Mini HF - with hydraulic protection, allowing the release force to be adjusted according to soil conditions

Mini-BF model

Mini-HF model

As with the used Mini The range of ploughs, as well as the out-of-service models, includes three frame sizes: Blocks 6, 8 and 10.

Each of these frames can be expanded by adding one or two additional shells. They can be:

bolted to the main frame
or hydraulically foldable, to reduce the overall length and weight of the plough during transport.

The figure shows Top view of Mini-6, Mini-8 and Mini-10 ploughs. Highlighted in bold Optional bolt-on rear wheel position, compared to standard rear wheel.

Optional hydraulic folding of the rear hulls, by allowing:

reduce weight during transport,
work with fewer hulls if needed.

Optional equipment

Strip-type nutrunners for work in sticky soil conditions. Counterflows for better ploughing of crop residues.

Enlarged forged tine - 12 cm longer than the standard tine.

EcoFlow tines - short and long versions are available. Recommended for sticky soils to improve soil flow.

Body knife

Extension of the support board for better plough stability.

Hydraulic adjustment of the width of the first furrow

Depth adjustment wheel - available in 6.00×9”, 200/60, 250/65, 340/55, 280/70 and 380/55

Transport wheel - available in sizes 200/60 14.5”, 250/65 14.5”, 340/55 16” and 380/55 17”

Front depth adjustment wheel - available in 6.00×9”, 200/60 14.5” and 250/65 14.5”

Hydraulic depth adjustment or combined wheel for transport and depth adjustment.

Lighting kit

Hanging head lock for transport

Wheels

	6 / 6+1 / 6+2	6 / 6+1 / 6+2	8 / 8+1 / 8+2	8 / 8+1 / 8+2	10 / 10+1 / 10+2	10 / 10+1 / 10+2
	Front wheel	Rear wheel	Front wheel	Rear wheel	Front wheel	Rear wheel
6.00 X 9" 10 PR	–	●	●	●	●	●
200/60 14.5" 10 PR	–	✕	✕	✕	✕	✕
250/65 14.5" 12 PR	–	✕	–	✕	–	✕
340/55 16" 14 PR	–	✕	–	✕	–	✕
380/55 17" 14 PR	–	✕	–	✕	–	✕

● Standard equipment
✕ Optional equipment
- not

	Mini 6	Mini 6+1	Mini 6+2	Mini 8	Mini 8+1	Mini 8+2	Mini 10	Mini 10+1	Mini 10+2
Working width, cm	195	228	260	260	293	325	325	358	390
Tractor power, HP	105-135	120-155	140-175	140-175	160-200	180-220	180-220	200-240	220-265
Distance between housings, cm	61	61	61	61	61	61	61	61	61
Ground clearance, cm	70	70	70	70	70	70	70	70	70
Weight, kg	920	1030	1140	1216	1303	1390	1600	1710	1820

Spanish manufacturer Sheep has more than 75 years of experience in the production of agricultural equipment.

Since its inception, the company has specialized in the production of plows. Over the past 15 years, the product range has expanded significantly, but the core line of tillage and cultivation remains, in which it applies its accumulated knowledge and experience.

Currently Sheep The company is the largest agricultural producer in Spain, exporting its products to more than 20 countries around the world.