A heavy-duty combination cultivator that combines the advantages of disc and tine cultivators in one pass.
Triton Heavy combination cultivator Combines the advantages of disc and tine cultivators in one pass
Full surface tillage with zoned loosening up to 40 cm depth
1. Full-surface cultivation zone. The double row of discs with aggressive geometry ensures perfect full-surface cultivation to a maximum depth of 18 / 21 cm, intensively mixing plant residues. The disc section also evenly distributes plant residues on the soil surface.
2. Deep loosening zone. Loosening depth up to 40 cm. Two rows of tines with optimized geometry ensure deep zonal loosening, which improves water penetration.
3. Furrow leveling zone. Leveling discs also enhance the incorporation effect of crop residues.
4. Clump breaking and soil compaction zone. Optimal soil compaction ensures good water penetration into the soil and moisture retention.
High quality and efficient work
- Great solution for heavy soils
- Low traction requirement
- High permeability of soil and plant residues
- Effective shaving and uniform mixing of crop residues in the tilled soil layer
- Deep zone cultivation with minimal clumping
Triton 410 P FIX HEAVY Fert+ Fertilizer placement at different depths Fertilizer placement at different depths
Extremely durable materials
Wear-resistant steel Leveling disc protection Maintenance-free bearings
Massive transport axle with brakes
Hydraulic adjustment of the working depth of the disc section
Working depth adjustment
Hydraulic tine working depth adjustment when working without rear rollers
Hydraulic adjustment of levelling discs Setting the left side deflector
Setting the right side deflector
Setting the side leveling discs
One of the biggest advantages is versatility and adaptability, providing great work versatility. Micro Drill for sowing small seeds
Triton 300 P Heavy combination cultivator
Triton 450 PS combination cultivator
Possibility of fertilizing with granular fertilizers
The dual-flow feeding system allows fertilizer to be distributed both on the surface and in deeper layers.
The dual-flow feeding system allows fertilizer to be distributed both on the surface and in deeper layers.
Sturdy construction
Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.
Extremely strong, high-quality materials are used for the production of working parts. The frame is precisely sized and made of high-strength steel.
Massive disk partitions
Very high release force due to massive disc sections.
The time-tested chisels are made of high-strength wear-resistant steel and coated with carbide plates. The option with hard alloy inserts along the entire length of the chisel increases their service life even further.
Durable and maintenance-free protection for leveling discs.
The maintenance-free disc arrangement ensures that the cultivator operates without additional lubrication.
For safe and fast transportation of the tractor.
Easy to use
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Easy and quick adjustment of the working depth of the discs by adjusting the washers on the hydraulic cylinder.
Simple setting of working depth by adjusting the hydraulic cylinder washers on the rollers.
Easy setting of working depth by adjusting the axle hydraulic cylinder washers when working without rear rollers.
Easy and quick disc adjustment from the comfort of the tractor cab.
Simple adjustment of the side stop with a pin, ensuring perfect connection of the passages.
Simple adjustment of the side stop with a pin, ensuring perfect connection of the passages.
The side leveling discs are easily adjusted with a pin, ensuring precise connection of passes.
A cleverly designed machine
The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Tubular roller TRS
Diameter – 586 mm
Diameter – 760/570 mm
Diameter – 600 mm
Diameter – 600/600 mm
The correct selection of the rear roller type, which significantly contributes to the final quality of cultivation, is of utmost importance. The soil is repeatedly compacted by the roller, while at the same time breaking up clods and leveling the surface. The type of roller is selected taking into account the type of soil and the planned use of the machine.
75 MULTICARBIDE PRO Coulter width – 75 mm 75 MULTICARBIDE Coulter width – 75 mm 75 CARBIDE Coulter width – 75 mm 40 CARBIDE Coulter width – 40 mm 55 CARBIDE Coulter width – 55 mm 75 MULTICARBIDE PRO 50 MULTICARBIDE PRO 75 CARBIDE 55 CARBIDE Disc Ø 620 mm Disc Ø 680 mm Right wing Left wing
TPH Category 3
K80 Ø 80 mm Swivel hitch eye Ø 50 mm, Ø 70 mm
Electro-hydraulic flow distributor Micro Drill small seed drill Coulters for tillage up to 35 cm depth Coulters for tillage up to 40 cm depth
Rollers
Diameter – 600 mm
Weight – 100 kg/m
Double ring roller DRR
Diameter – 540/540 mm
Weight – 195 kg/m
Roller LTX
Weight – 200 kg/m
Disc roller SDR
Diameter – 580 mm
Weight – 220 kg/m
Double studded roller DSR
Weight – 185 kg/m
V-shaped roller VR
Weight – 175 kg/m
Double V-shaped annular roller DVR
Weight – 190 kg/m
Tubular TRS roller Double ring DRR roller LTX roller SDR disc roller Double studded roller DSR V-shaped VR roller Double roller DVR
Crushing ●●○○ ●●●○ ●●○○ ●●●○ ●●○○ ●●●○ ●●●○
Compaction ●●●○ ●●●● ●●●● ●●●● ●●●○ ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Resistance to clogging ●○○○ ●●●● ●●●○ ●●●○ ●●●● ●●●● ●●●●
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●●● ●●●○ ●●●○ ●●●○ ●●●● ●●●●
Working tools
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +200–500 %
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +150–400 %
Coulter thickness – 15 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200 %
Coulter thickness – 25 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200%
Diesel consumption – -10%
Coulter thickness – 20 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200%
Diesel consumption – -10%
Towing
The pins can be replaced with category 4 TPH.
Other optional equipment
Divides one tractor hydraulic circuit into three separate circuits.
| Triton 300 P HEAVY | Triton 410 PS HEAVY | Triton 410 P FIX HEAVY Fert+ | Triton 490 PS HEAVY | Triton 580 PS HEAVY | Triton 660 PS HEAVY | |
|---|---|---|---|---|---|---|
| Working width, mm | 3 000 | 4 100 | 4 100 | 4 900 | 5 800 | 6 600 |
| Transport width, mm | 3 000 | 3 000 | 4 100 | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 1 950 | 3 000 | 3 000 | 3 400 | 3 800 | 4 000 |
| Total length, mm | 8 500 | 9 500 | 9 500 | 9 500 | 9 500 | 9 500 |
| Hopper capacity, l | - | - | 5 000 | - | - | - |
| Fertilizer rate, kg/ha | - | - | 70─300 | - | - | - |
| Discs, pcs. | 14 | 20 | 20 | 24 | 28 | 32 |
| Rows of discs, pcs. | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between disc rows, mm | 950 | 950 | 950 | 950 | 950 | 950 |
| Disc diameter, mm | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 | 620 / 680 |
| Distance between discs, mm | 420 | 420 | 420 | 420 | 420 | 420 |
| Maximum working depth of discs, mm | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 | 180 / 210 |
| Tines, pcs. | 7 | 9 | 9 | 11 | 13 | 15 |
| Number of tine rows, pcs. | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between tines, mm | 420 | 420 | 420 | 420 | 420 | 420 |
| Distance between tine rows, mm | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 | 1,280─2,390 |
| Maximum working depth of the tines, mm | 400 | 400 | 400 | 400 | 400 | 400 |
| Frame clearance, mm | 920 | 920 | 920 | 920 | 920 | 920 |
| Diameter of leveling discs, mm | 460 | 460 | 460 | 460 | 460 | 460 |
| Productivity, ha/hour | 2.4─3.6 | 3.3─4.9 | 3.3─4.9 | 3.9─5.9 | 4.6─7.0 | 5.4─7.9 |
| Tractor power, kW/HP | 155─260 210─355 | 220─290 300─395 | 220─290 300─395 | 260─340 355─460 | 310─400 420─545 | 350─480 475─655 |
| Working speed, km/h | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 |
| Brakes | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit |
| Required pressure, kPa | 5,5 | 5,5 | 5,5 | 5,5 | 5,5 | 5,5 |
| Hydraulic connections/pressure, bar | 5 (3) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 | 6 (4) / 200 |
| Weight, kg | 5 300 | 9 000 | 10 000 | 9 900 | 11 200 | 12 100 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.