POPULAR

Ambion self-loading trailers

Hay and straw models with capacities from 24 to 49 m³ for maximum work and transport efficiency and gentle loading

For consultation or to receive a purchase offer, please contact the following contacts:

Ambion - a hay and straw collection trailer

High harvesting performance and gentle loading – these are the main features that distinguish Strautmann Ambien series feed trailers.
Large capacity hay superstructures ensure maximum transport efficiency.

Main advantages:

Loading capacity: 24–49 m³
Firm toefeed mechanism bearing system
Optional pick-up width 1.8 m (standard) or 2.25 m
Flex-Load pick-up (optional) – for flexible loading and time saving
Glove feeding mechanism and cutting unit – for safe loading and precise cutting
Attachment options adapted to hay or straw collection
Tandem linkage chassis
Control options: E-Control (standard) or Smart 570

Gentle loading – using the Ambion glove feeding mechanism

Glove feed mechanism bearings

Lateral spherical bearings ensure long service life
Rotation of the glove feed mechanism is easily compensated without causing stress in the structure
Low maintenance and low wear

The two-way curved directional control ensures:

Maximum harvesting performance
Long service life

The double fingers of the glove feed mechanism are always directed at an optimal 90° angle to the conveyor chute, therefore:

Less engine power required
High cutting quality is achieved
The feed is processed extremely gently, preserving its structure and nutritional value

Dvipusis lenktas krypties valdymas užtikrina

4-row glove feeding mechanism

Four rows of fingers (standard equipment on Ambion 290–360 models)

Extra gentle loading
Ideal for hay and light materials

Gear

The glove feed mechanism is driven by a sturdy Duplex chain
The pick-up is driven by a reinforced roller chain
Spring-loaded chain tensioning – for infrequent tensioning, ensuring consistent chain performance

5-row glove feeding mechanism

Five rows of fingers (standard equipment on Ambion 440–500 models, optional on Ambion 250–360)

High harvesting performance
Durability – the design is adapted for intensive use

Gear

Driven by large diameter gears
External steel beam ensures maximum stability
Gear wear due to one-sided wear is eliminated

Unique solution – Flexible loading collector

Exclusive Flex-Load pickup – is the result of decades of experience in the production of silage trailers. Innovative plastic tines ensure exceptional wear resistance. They are stiff enough to precisely lift the forage from the roller, but flexible enough to adapt to uneven terrain. This reduces mechanical wear, operating costs and operator workload – the ideal solution for efficient work every day.

Your advantages

Reduced risk of finger breakage
Minimal finger wear
Finger replacement in less than one minute
Ideally adapts to the ground surface
Optimally protects the soil
Less feed contamination

Wide collection

Pick-up width – 1.80 or 2.25 m
The flat-lying pick-up ensures excellent ground adaptation
No cam mechanism – few moving parts, so minimal wear
Road travel is possible without turning the castors
Even feed intake thanks to double roller press

Doesn't miss a single stem

2.25 m flexible loading (Flex-Load) pick-up – for the highest demands

Thanks to the new design specially designed for hilly areas Flex-Load pick-up, Ambien ensures ideal adaptation to the ground surface and excellent feed intakebecause you have large working width and pendulum movementIn addition, flexible loading plastic fingers provide additional protection for the feed, ensuring its quality throughout the work.

Large collection width

2.25 m according to DIN standard
Optimal harvesting from wide hay swaths
Easily adjustable pick-up speed thanks to hydraulic drive
Reliable forage collection behind the pick-up – with 300 mm compaction augers

Pendulum displacement

Parallelogram suspension allows up to 25 cm of pendulum movement
Excellent forage pick-up due to excellent adaptation to uneven terrain

Anstat structure

Hay superstructure

Extra large capacity superstructure for efficient transport of dry fodder or straw
Sturdy construction with strong side pillars
Wide opening rear opening ensures quick unloading

Silo superstructure

Profiled sheets with strong side pillars
Superstructure holders with ropes ensure maximum transport volumes

Cam-operated steel tine pick-up system

Galvanized collector, 1.8 m wide
Flexibility for good adaptation to the ground surface
5-row, cam-operated system
Roller in front of the flow deflector plate ensures optimal material flow

Steered guide wheels

Steered guide wheels with rubber tires
Fine adjustment options ensure consistent feed intake
Efficient material collection in all working conditions

Additional guide wheels

Additional (optional) wheels behind the pick-up ensure reliable ground adaptation

Cutting system

Standard set includes 6 knives
(theoretical cutting length – 240 mm)
Optional:
– 19 knives (cutting length – 80 mm)
– 37 knives (cutting length – 40 mm)
Additional knives are deployed hydraulically
Easy maintenance – knives can be changed without tools
Individual knife protection system reliably protects against foreign objects

Quick lubrication system

All finger and control bearing grease nipples are grouped in the center
Lubrication is done from one rotor position – fast and convenient
Operating time is reduced to 90% compared to conventional lubrication

Flexible plastic fingers

Special polyurethane composition.
Helical 6-row segmental arrangement of rods.
The fingers are flexible in all directions.
Ideal adaptation to the ground surface.
Protected from the penetration of the tines into the ground, avoiding contamination of feed.
Minimal wear and tear and minimal risk of broken spokes.
Fingers are replaced in a minute using just one tool.

Roof profiles

Robust roof profiles made up of wide guide plates
Compressing the loaded material to increase transport capacity
Safe road transport without material loss, especially for light materials such as hay or straw

Dosing device

2 metering rollers spread a neat swath in the silos
3 shafts (optional) – for even more precise spreading
Easy distribution and reliable compression ensure the highest silage quality

Dozavimo įrenginys Abio rinktuvinė priekaba

Transportation floor

Smooth feed thanks to 10 mm thick round steel chains with a breaking load of 13 tons each
25 mm thick wooden floor ensures strength and durability
Convenient profiled crossbars with a U-shaped cross-section, tightened to the chains

Hydraulic transport floor drive

Optional two-stage motor for maximum unloading speed
Comes standard with shock absorber

Towing

Hydraulically foldable drawbar, suitable for top or bottom hitch
Optional hydro-pneumatic boom suspension for maximum ride comfort
Clearly arranged hose holder allows for quick and convenient tractor connection

Spring tandem chassis

Safe and comfortable driving even on rough terrain
High stability in corners and at higher speeds
The wide range of pendulum movement allows the chassis to adapt well to surface irregularities
Depending on the application, chassis with an axle load of 10–13 tons are available.
In combination with the appropriate tires, a low overall height can be achieved, especially suitable for collecting fresh forage

Steering axle

Optional equipment
Saves turf – less soil damage on bends
Reduces tire wear, especially during frequent maneuvering

Tire choices

Available in a variety of tire sizes to meet different job needs
Large tires up to 710/40 R 22.5 ensure soil-friendly load distribution and high stability on slopes

E-CONTROL control

Standard equipment
Control of hydraulic functions with switches (lever)
Convenient and easy to use
Oil supply via pressure demand system

ISOBUS CONTROL operation

Comprehensive machine control – allows you to monitor and control all functions at any time
Clear division into loading, unloading and road driving modes
Ergonomically positioned control buttons ensure comfortable, safe and fast operation
Automatic functions make the operator's work easier
Comfortable and efficient operation, even in difficult working conditions

	Ambion 290	Ambion 360	Ambion 440 (low/high)	Ambion 500 (low/high)
Total length, m	8.95	10.35	10.75	12
Outer wheel width (chassis 13 t, tires 620/40 R 22.5), m	2.72	2.72	2.72	2.72
Outer wheel width (13 t reinforced chassis, tires 710/40 R 22.5), m	2.81	2.81	2.81	2.81
Height (chassis 13 t, tires 620/40 R 22.5), m	3.66	3.66	3.94 / 4.12	3.94 / 4.12
Height (13 t reinforced chassis, tires 710/40 R 22.5), m	3.76	3.76	4.00 / 4.18	4.00 / 4.18
Loading space height, m	2.22	2.22	2.42 / 2.60	2.42 / 2.60
Loading space width, m	2.1	2.1	2.1	2.1
Loading space length, m	6.08	7.48	8.02	9.07
Kerb weight basic equipment, kg	5800	6100	6400	6600
Maximum permissible gross weight, kg	15000	15000	15000	15000
Required power, kW / HP	51 / 70	59 / 80	59 / 80	66 / 90
Loading volume (average compressed), m³	47.6	59.5	67.2 / 71.4	78.2 / 83.3
Loading volume according to DIN 11741, m³	28	35	39.5 / 42.0	46.0 / 49.0
Loading device type	Glove bands	Glove bands	Glove bands	Glove bands
Working width of the pick-up, m	1.8	1.8	1.8	1.8
Number of knives, pcs.	6/19/1937	6/19/1937	6/19/1937	6/19/1937
Theoretical cutting length, mm	240 / 80 / 40	240 / 80 / 40	240 / 80 / 40	240 / 80 / 40

A family-run company based in northern GermanyB. Strautmann & Söhne GmbH u. co. KG"has been around for over 85 years.

STRAUTHMANN The factory has developed a wide range of products, especially well suited for livestock farms. The company can offer silage handling equipment for various purposes: silage buckets, silage cutters and silage block cutters for easy silage removal.

STRAUTHMANN Silage block and feed transport trailers have been ensuring fast and easy feed supply for several decades. We also manufacture trailed and self-propelled feed mixers - perfect for preparing physiologically ideal animal feed.

For optimal feed quality, STRAUTHMANN presents grass silage handling equipment. In order to maintain the best quality of feed, the grass loaded into the self-loading trailer is gently but optimally chopped. Customers can purchase tri-axle trailers and dump trucks as well as trailers for convenient feed transportation. Also, manure and universal shakers are available in various sizes. Thus, by creating a high-quality and diverse product offering, STRAUTHMANN the company becomes a competent partner for the farmer.