Kompaktomat NS Germinators

2.5–6-meter mounted seed drills are designed for soil preparation after plowing

For a purchase offer, please fill in the enquiry form or contact the following contacts:

Kompaktomat NS Germinators – These are time-tested machines designed for soil preparation after plowing.

In a single pass, the soil is perfectly tilled to a condition suitable for sowing.

Working width from 2.5 to 6 meters.
Suitable for use with from 75 hp power technology.
Forks Arrange in two rows, with a spacing of 21.5–25.5 cm between the tines and 24–29 cm between the rows of tines.
Working depth of the tines from 0 to 10 cm.

Key Features of the Farmet Kompaktomat NS

Proper preparation of the seedbed

The Kompaktomat NS can perform up to 7 different soil preparation operations in a single pass. Several working sections effectively level, loosen, crumble, and compact the soil, creating a uniform seedbed throughout the entire working depth.

Modular configurations for various soil types

The Kompaktomat NS can be equipped with various tines, levelling boards, and rollers, making it easy to adapt the implement to different soil types and farming techniques. The wide range of options allows every farm to configure the optimal seed drill to meet its specific needs.

Optimal soil compaction

Thanks to the precisely coordinated arrangement of its working elements and optimal weight distribution, the Kompaktomat NS ensures a uniform soil structure and adequate moisture retention in the seed zone. High-quality compaction and leveling of the soil create ideal conditions for uniform plant emergence.

3-year warranty

All Farmet equipment comes with a 3-year warranty. The company pays particular attention to the high quality and reliability of its machinery. This commitment reflects the company's long-standing philosophy based on precision machining, durability and long service life.

Working areas

The area where the tractor tracks are being loosened. Precise tillage ensures uniform crop germination.
Primary soil levelling zone. A carefully leveled soil surface ensures uniform further compaction and soil cultivation.
Area of soil compaction caused by the front roller. The front roller breaks up clods on the soil surface, while also compacting the soil and restoring its capillary action.
Seedbed preparation zone. The coulter section loosens the soil to the set depth. This depth should correspond to the depth of the upcoming sowing. The coulters with arrow-shaped points ensure thorough surface tillage and weed control.
Furrow levelling zone behind the coulter section.
Soil compaction zone using a rear roller. The roller finely breaks up clods and ensures final soil compaction, fully restoring its capillary action. Intense capillary movement of water to the surface ensures good plant germination even during dry periods.
Final soil leveling area. The rear levelling board ensures perfect soil levelling for subsequent sowing.

High quality and efficient work

7 operations are performed simultaneously.
Large working speed – up to 14 km/h.
Creates proper soil structure and compacts it, ensuring even cultivation.
Precise setting of the working depth of the coulters ensures very good seedbed preparation.
Automatic tine protection guarantees uninterrupted operation.
Excellent levelling of uneven fields with optimal soil compaction.

Excellent surface smoothing, clod breaking

Perfectly levels the soil surface, breaks up clods, optimally prepares the seedbed. The field is particularly well leveled by leveling sections, which perfectly level and distribute even the largest irregularities.

Prepares the soil for sowing in one pass

High working speed allows you to achieve high work productivity even when working with the Kompaktomat unit with a smaller working width. Thanks to the extremely well-designed design and the optimal weight of the Kompaktomat, the soil is cultivated in one pass after ploughing.

Several working operations are performed in one pass, during which the soil surface is leveled and compacted at the selected depth. The soil capillarity is restored and the sowing base is formed at the required depth. The clods are finely crushed.

Prepares the soil for sowing in one pass

Minimum maintenance requirements

The germinator controls are designed to ensure maximum worker safety. Simple but high-quality construction with minimal maintenance requirements.

Poor cultivation

With uneven soil cultivation, there is a risk that plants will germinate incorrectly and unevenly.

Quality cultivation

Uniform soil cultivation using the Kompaktomat germinator results in uniform plant germination.

Excellent compaction → ensures water absorption and capillary rise of water to the surface

Sturdy construction

Extremely durable materials

Extremely durable, high-quality materials used for the production of working parts ensure a long service life. Robust frame construction.

Solid frontno ironing section

Ensures high-quality soil surface leveling.

Tine protection

Automatic tine protection.

Easy to use

Minimal number of adjustable and lubricated points, so maintenance is extremely easy.

Minimum number of adjustable seats.
Minimum number of places to apply.

Front ironing section

Height adjustment of the front ironing section.

Leveling section behind the tine section

Height adjustment of the levelling section located behind the coulter section.

Working depth

Setting the working depth of the plows.

Choosing Among Different Types of Plows

Standard plowshare

DURA+ plowshare

MULTICARBIDE plowshare

Tine sections

View the differences in each section Optional equipment

Section AL

Section CF

Section AP

Examples of Kompaktomat NS germinator configurations

Compactor K 250 N

Front smoothing section for rough surface smoothing.
Front roller for breaking up clods.
The plow section cuts and tills the soil.
The central levelling board levels the tilled soil and directs it toward the rear roller.
Rear roller for final soil preparation.
The rear smoothing section smooths the surface.

Compactor K 600 NS

Tractor-mounted subsoilers are designed to break up compacted soil.
Front smoothing section for rough surface smoothing.
Front roller for breaking up clods.
The plow section cuts and tills the soil.
The central levelling board levels the tilled soil and directs it toward the rear roller.
Rear roller for final soil preparation.
The rear smoothing section smooths the surface.

Working tools

Kompaktomat Standard Beam Plow

Designed for AL / AP sections and CA wheel mark eradicators.

Kompaktomat boom tine DURA+

Designed for AL / AP sections and CA wheel mark eradicators.

Kompaktomat MULTICARBIDE plow blade

Designed for AL / AP sections and CA wheel mark eradicators.

CARBIDE chisel

For the CF section.

Double-sided chisel

For the CF section.

Double-ended standard chisel

Designed for CC track looseners.

DURA+ Double-Sided Chisel

Designed for CC track looseners.

Tine sections

AP section

Universal tillage section with 27 cm wide tine arms arranged in two rows. The tines are mounted on tine holders with a geometry that improves the throughput of crop residues. This tine section is suitable for fields with a lot of chopped crop residues, as well as for heavy soils. Comes standard with a height-adjustable levelling beam behind the tines.

AL section

The section consists of 27 cm wide tine coulters arranged in two rows. This section is suitable for light soils without plant residues. It comes standard with a height-adjustable levelling bar behind the coulters.

CF section

The section consists of narrow tines 3.5 cm wide, arranged in four rows. Ideal for spring soil preparation or heavy soils where bringing moist soil to the surface is undesirable. Comes standard with a levelling bar behind the tines.

	AL	AL-L	CF	CF-L	AP	AP-L	AL4
Number of tine rows, pcs. / distance between rows, mm	2 / 400	2 / 510	4 / 240	4 / 265	2 / 490	2 / 600	4 / 270
Leveling beam behind the tines	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●
Full surface cultivation	●●●●	●●●●	●●○○	●●○○	●●●●	●●●●	●●●●
Suitability for light soils	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●
Suitability for medium soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●●
Suitability for heavy soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●●
Suitability for rocky soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●○
Suitability for wet soils	●●○○	●●○○	●●●●	●●●●	●●○○	●●○○	●●●○
Resistance to clogging	●●○○	●●○○	●●●○	●●●○	●●●○	●●●○	●●●○

Rollers

Ring roller RR

Diameter – 400 mm
Weight – 115 kg/m

Can be used as a front and rear roller.
It works well in all types of soils, maintains good working depth, and is suitable even for wetter soils.

Crosskill roller CR

Diameter – 400 mm
Weight – 133 kg/m

Can only be used as a rear roller.
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking.

Double Crosskill roller DCR

Diameter – 400 mm
Weight – 185 kg/m
Distance between roller rows – 274 mm

Can only be used as a rear roller.
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking. Compared to the Crosskill roller, it ensures more intensive clod breaking.

Spiral beam roller SB

Diameter – 400 mm
Weight – 70 kg/m

Can be used as a front and rear roller.
High-quality clod breaking. Suitable for use in wet conditions.

Beam roller BR

Diameter – 400 mm
Weight – 63 kg/m

Can be used as a front and rear roller.
Good clod breaking. Not very suitable for wet conditions.

The correct selection of the rear roller type, which significantly contributes to the final quality of cultivation, is of utmost importance. The soil is repeatedly compacted by the roller, while at the same time breaking up clods and leveling the surface. The type of roller is selected taking into account the type of soil and the planned use of the machine.

	Crosskill roller CR	Double Crosskill roller DCR	Beam roller BR	Spiral beam roller SB	Ring roller RR
Crushing	●●●●	●●●●	●●●○	●●●○	●●○○
Compaction	●●●●	●●●●	●●●○	●●●○	●●●●
Depth support	●○○○	●●○○	●●●○	●●●○	●●●●
Resistance to clogging	●●●○	●●●●	●●○○	●●●○	●●●●
Suitability for rocky soils	●●○○	●●○○	●●●○	●●●○	●●●○
Suitability for wet soils	●●○○	●●●○	●○○○	●●●○	●●●●
Suitability for heavy soils	●●●○	●●●●	●●○○	●●○○	●●●○
Suitability for medium soils	●●●●	●●●●	●●●○	●●●○	●●●○
Suitability for light soils	●●●●	●●●●	●●●●	●●●●	●●●○

Track looseners

Track cultivators CC

Kompaktomat K 500 NS + K 600 NS

The design of the mounted cultivator does not allow the direct mounting of the wheel mark eradicators on the cultivator itself. Therefore, it is possible to additionally install a frame with wheel mark eradicators between the tractor and the cultivator. The wheel mark eradicators design is connected to the machine using a three-point suspension system.

Track cultivators with double-sided tines CC

Kompaktomat K 300 N + K 400 NS

Automatic release tractor wheel mark eradicators with double-sided tines. Suitable for heavy soils where there is a risk of raising wet clods to the surface.

Ironing sections

Fixed ironing section

Automatically releasing levelling beam with toothed profile. Robust construction ensuring precise levelling of large clods.

FL = fixed mechanical slide, FH = fixed hydraulic slide.

Flexi-board ironing board

Automatically unprotected levelling beam, consisting of individual flexible segments. Better clod breaking.

L = Flexi-board, FB = hydraulically operated Flexi-board.

The screed blades act as a single unit, providing better stability.

Joining the edges of Flexi-board ironing boards with stabilization

The arms of the ironing board function as a single unit, ensuring greater stability.

Rear sections

Rear leveling beam

Passive soil levelling behind the rear roller. The aggressiveness of the levelling strip is adjusted by means of rotary stops. Can be used with all types of rear rollers.

Rod roller RF

Active crushing of remaining clods behind the rear roller.

Crosskill roller RFC

Active crushing of remaining clods behind the rear roller.

	K 250 N	K 300 N	K 400 NS	K 500 NS	K 600 NS
Working width, mm	2 580	3 000	4 000	5 000	6 000
Transport width, mm	2 580	3 000	3 000	3 000	3 000
Total length, mm	2 640	2 640	2 930	3 200	3 200
Working depth, mm	0-100	0-100	0–100	0-100	0-100
Arrow tines – AL section, pcs.	11	13	18	23	27
Forged tines – CF section, pcs.	26	30	39	49	59
Arrow tines – AP section, pcs.	11	12	16	23	24
Productivity, ha/hour	2–3	2.2–3.2	3–4	5–6	6–7.2
Tractor power, kW/HP	55 / 75	70 / 95	90 / 125	120 / 165	130 / 180
Working speed, km/h	10–14	10–14	10–14	10–14	10–14
Maximum working slope, °	11	11	6	6	6
Hydraulic connections/pressure, bar	0	0	1–3 / 200	1–3 / 200	1–3 / 200
Number/type of hydraulic connection pairs	0	0	2-6 / ISO 12.5	2-6 / ISO 12.5	2-6 / ISO 12.5
Towing	TPH Category 2	TPH Category 2	TPH Category 3	TPH Category 3	TPH Category 3
Lower suspension link spacing (measured from link axis centers), mm	870 ± 1.5	870 ± 1.5	1010 ± 1.5	1010 ± 1.5	1010 ± 1.5
Diameter of holes in the lower suspension links for suspension pins, mm	29	29	37,5	37,5	37,5
Diameter of the upper suspension connection hole for the suspension pin, mm	26	26	32,5	32,5	32,5
Weight, kg	1 155	1 510	2 670	3 150	3 500

FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.

Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.

FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.