Agrio's largest trailed sprayers with tandem chassis, with a capacity of 10,000 - 14,000 liters
GIANT with a 10,000-14,000 liter tank and tandem chassis, it is the largest trailed sprayer on the market
It easily proves its advantage by using the maximum working width of the beams in very long areas. With a smaller capacity tank, you would have to return from the middle of the field to the headland more often empty and return to the field after filling up. Also, with the GIGANT we can do without bringing water to the fields in tankers, thus reducing operating costs.
High quality and efficient work
- 10,000 – 14,000 liter capacity.
- Stable working beams in the transverse and longitudinal directions reduce spraying unevenness to a minimum.
- Thanks to their excellent balancing and independent suspension, the booms meet the highest requirements for spraying even on uneven fields.
- The folding ends of the beams allow you to overcome obstacles without driving over them.
- The spacious storage compartment will accommodate all the tools needed for work.
- Safer filling of plant protection products into sprayers with easyFlow system.
- All sprayers are made to order.
Pneumatic control equipment has the advantage of a simple design – the main control valve also acts as an overpressure protection. This allows the number of hoses to be reduced to a minimum. Simple hose connections are an advantage for flushing and emptying the sprayer, there is no need to use antifreeze, and water can be easily removed from all lines.
1 – Main tank 16 – 2-lever valve
Adapter for canister Adapter for eco-mixer lid
The round shape of the eco-mixer ensures better wall flushing and, together with the easyFlow quick connection, allows for quick filling with concentrated agents from canisters into the sprayer tank and rinsing the canisters with clean water without the service personnel coming into contact with chemicals. Filling chemicals with the easyFlow quick connection is simple, fast and, most importantly, safe.
Comparison of conventional flushing with triple flushing and sequential flushing A typical flush takes 20-25 minutes and 90 liters of clean water. Continuous flushing – time 5 minutes and 40 liters of clean water.
Polyethylene tank. Smooth inner surface, modern design, can be supplemented with partitions upon request. The laminated fiberglass tank has baffles inside that reduce liquid leakage. The inner coating seals the pores in the fiberglass and makes it easier to flush the tank. Eco-faucet Comfort Fill. Made of polyethylene, volume – 60 l, quick coupling can be installed easyFlow for filling protective equipment into the sprayer without contact with the environment. The centrifugal filling pump, with a capacity of 600 l/min, shortens the filling time of the main tank and thus can increase the daily working efficiency of the sprayer. Piston-diaphragm spray pump Annovi Reverberi, with a capacity of 160-500 l/min. Capable of operating for a long time at higher pressure. Stainless steel flushing nozzles, do not get sanded. Central filtration ensures equal pressure in all nozzles. Blue strainer 50 M, green strainer 100 M. Injection mixing with nozzles allows mixing of settled products even after a longer break in work. High-pressure circulation in the booms fills the spray tubes so that the chemicals from the tank reach the nozzles before spraying begins. Simple holder with anti-drip membrane valve. Triple holder with anti-drip membrane valve. The Dual Selejet switches the spray between 2 different sized nozzles while driving, maintaining constant nozzle pressure at different speeds. The Quad Selejet switches the spray between 2, 3 or 4 nozzle sizes on the go. Suction line filter with red 32 M mesh protects the spray pump from damage by larger impurities.
Water system features
Water scheme (standard)
Water scheme Topline (standard)
2 – Clean water tank
3 – Eco-mixer
4 – 5-way valve – suction
5 – 5-way tap – pressure
6 – Spray pump
7 – Suction filter
8 – Pressure gauge
9 – 2-way tap
10 – Check valve
11 – Nozzle
12 – Basic mixing
13 – Flushing nozzle
14 – Injector
15 – Canister flushing nozzle
17 – Eco-mixer mixing
18 – Eco-mixer flushing
19 – Control valve
20 – Main valve
21 – Sectional valve
22 – Pressure filter
23 – Flow meter
24 – Beams
25 – Tank Drain
26 – 2-way valve, operated by pneumatic cylinder
27 – Drain tap with Geka connection
Safer filling of plant protection products into sprayers
Eco-mixer Comfort Fill
When installing easyFlow in an older sprayer, the following technical requirements must be met:
Consistent internal flushing
Continuous internal flushing of sprayers is a new method that significantly reduces water consumption and time spent on flushing. This method not only improves flushing, but also properly utilizes product residues.
Flushing procedure:
• The sprayer is emptied outdoors.
• When the pressure drops, air starts to flow from the nozzles.
• The flushing pump is switched on, while the spray pump continues to operate.
• Finish spraying the full concentration preparation on the unsprayed field area.
• After using half of the clean water, turn the sections on and off, the main valve, and briefly open all other lines that still contain the product (filters, mixing flushing).
• The flushing process is complete when all clean water is used.
Including getting on and off the tractor and/or driving over sprayed plants.
The entire process can be controlled only from the tractor.
Technological features
Electronics selection
TRACK GUIDE II
TRACK GUIDE III
TOUCH1200
BASIC-Terminal
TOUCH800
COMFORT Terminal
SPRAYS
Fully automatic sprayer control unit. Computer with integrated control panel.
The maximum number of sections is 9 sections.
SPRAYLIGHT
The maximum number of sections is 7 sections.
TANK Control II
Used as an electronic tank level gauge. If the sprayer is equipped with Topline, the suction and pressure functions can be switched on the Tank-Control II display. These functions can be switched from the computer and terminal.
S-Box attachment to the control lever.
A manual control module for individual sections is included, connected to the terminal. Ideal for uneven section switching (spraying individual weed spots). The control unit has up to 13 sections.
Electrical beam tilt adjustment with a potentiometer makes it easier for the operator to correctly set the beam parallelism and allows for precise travel adjustments. Hydraulic tilt adjustment. Hydraulic shock absorbers dampen the movement of the beams in both directions. Stabilizers reduce forward/backward vibration of the beams. The bar height indicators allow you to automatically level the beams without a computer. Soft vertical shock absorption of the beams is provided by a coiled spring. The beams suspended on the rope are not rigidly connected to the chassis and react minimally to the chassis tilt. Ultrasonic sensors send and receive a signal reflection from the ground (plants). The information is processed by a computer and gives a signal to the beams to level themselves.
The DC Top Super Vario system provides perfect field surface tracking – it allows the boom wings to follow the surface not only when rising but also when falling, independently of each other. This will ensure more precise spraying in difficult field terrain conditions.
Top mounting creates greater sprayer clearance. The hitch on the K80 sprayer is very useful - the hitch has no play and thus does not increase the forward/backward vibration of the booms. Towbar, pump with mechanical drive. Shock-absorbing drawbar. The lower hitch has a high lifting capacity and allows you to hitch a sprayer up to 8000 l with one axle. The hitch on the K80 sprayer is very useful - the hitch has no play and thus does not increase the forward/backward vibration of the booms. BPW non-suspension axle, adjustable track, up to 7 t. Non-suspension axle ADR, adjustable track, up to 5 t. Non-shock-absorbing, steered axle, BPW up to 10 t. Shock-absorbing, steered axle BPW with air suspension up to 10 t. BPW shock-absorbing axle with air suspension: Three-point hitch attachment.
Beams
The performance of the beams is the main characteristic of every sprayer.
Features of AGRIO beams:
DC Top Super Copper System
LED beam lighting
Chassis
I var. – up to 6.5 t;
II var. – up to 9 t;
III var. – up to 10 t
•adjustable top hitch 95-100 cm • central 5-way pressure tap, central 5-way suction tap, external 2ʺ filling and suction, 1 suction + 2 pressure filters
Dimensions
Standard equipment
•rigid drawbar
•tandem chassis with air suspension, rear axle steered, track width 225 cm
•air and parking brakes
•maximum possible wheel diameter 165 cm
•pump AR 280 for beams up to 30 m
•2 pumps AR 185 for beams over 30 m, driven by hydraulic drive from the tractor
•fiberglass laminated tank with baffles and internal flushing, pressure mixing and excess mixing
•manually lowered PE 60 l chemical mixing tank with 4-function control, internal
flushing, level gauge, canister flushing nozzle and mixing nozzle
•15 l capacity for hand washing
•600 l clean water tank integrated into the main tank with level gauge
•without a computer
•pneumatic control
•6 working sections up to 30 m
•8 working sections from 30 m
•removable control panel
•beams with active tilt adjustment and potentiometer
•full set of shock absorbers on beams and arms
•stainless steel Ø20 mm pipes in beams with simple nozzle holders every 50 cm
•lights for road traffic
•hydraulics controlled by 3 hydraulic circuits from the tractor
•tool box
EARLY The company, founded in 1993, began its activities with the reconstruction of used sprayers. To date, the factory has expanded significantly, taking a big step forward. Gradually developed EARLY Sprayer group – top quality trailed and self-propelled sprayers, designed with spray booms reaching 36 m, tanks with a capacity of up to 10,000 liters. Advanced solutions based on practice and economic logic are used in production.
The company's development was greatly influenced by cooperation with the German sprayer manufacturer GSB, when in 1993 AGRIO acquired a license for the production of booms, at the same time gaining a lot of valuable information on how to produce a quality sprayer. The company has been improving sprayers for 20 years.
EARLY The uniqueness of the sprayers is the pneumatic control and the spatial booms on the pendulum suspension. The pneumatic control responds quickly, maintenance is very simple and even with intensive use of aggressive liquid fertilizers has an unlimited service life. The booms, thanks to their excellent balancing and independent suspension, meet the highest requirements for spraying even on uneven fields.
The company pays great attention to after-sales service, striving to ensure that the sprayers operate reliably not only during the warranty period, but also throughout their entire service life. The machines are designed to withstand maximum load under intensive use conditions.
Currently EARLY is the largest manufacturer of outdoor sprayers In the Czech Republic, their products are among the best in the world. The 60% sprayers manufactured by this company are sold in the German market, which is characterized by special demands, strict requirements and laws.
You may also be interested in:
POPULAR
POPULAR
POPULAR
POPULAR
Mamut XL trailed sprayers
The largest single-axle trailed sprayers have a capacity of 7,000 - 8,000 liters.