Two-row mounted tine cultivators for working up to 35 cm depth.
Duolent NS Suspension Tines intended for shaving stubble after harvest and cultivating the soil to a depth of 35 cm
Loosening up to 35 cm with excellent incorporation of plant residues.
- Working width 2.1 to 5.5 metres.
- Suitable for use with from 90 hp power technology.
- Forks arranged in two rows, with 42 cm tine spacing and 78 cm tine spacing between rows.
- Working depth 6 to 35 cm with intensive mixing.
Highlights of FARMET Duolent NS
Cultivation of stubble on the whole area
One of the main advantages of the Duolent NS tine cultivator is that it allows you to cultivate the entire soil surface after harvesting. The massive tines loosen and mix the soil intensively, so that crop residues are evenly incorporated into the cultivated layer. This promotes faster decomposition of residues, improves soil structure and prepares the field for further tillage or sowing operations.
Excellent bandwidth
The Duolent NS tine cultivator offers excellent tine penetration thanks to the 42 cm tine spacing. This design allows the soil and crop residues to move easily through the working area, reducing the risk of blockages, even when working after harvest or with large amounts of straw. Thanks to its good permeability, the cultivator works stably and maintains an even cultivation result, helping to prepare the field efficiently for further work.
Wide choice of security systems
The machine can be equipped with different durable and maintenance-free tine protection systems, so it can be adapted to different soil conditions. With a release force of up to 600 kg, the guard systems help protect the working units from overloading and ensure reliable operation even on heavier or stony soils.
3-year warranty
All Farmet equipment comes with a 3-year warranty. The company pays particular attention to the high quality and reliability of its machinery. This commitment reflects the company's long-standing philosophy based on precision machining, durability and long service life.
Working areas
Shallow stubble cultivation with swallows to a depth of 6-20 cm.
Deep tillage without swallows to a depth of 35 cm.
- Shake zone. Wide choice of working depths from 6 to 35 cm. The side wing coulter for full stubble cultivation is used for soil loosening from 6 to 20 cm. The two rows of tines ensure very good loosening of the soil, intensive mixing of soil and crop residues and very low resistance.
- Surface levelling zone. The levelling discs also improve the insertion of crop residues.
- Crushing and compaction zone. Optimal soil compaction ensures good water penetration and moisture retention.
High quality and efficient work
- Optimal tines shape results in low resistance and excellent mixing.
- 420 mm distance between tines ensures excellent permeability of plant residues.
- The curved top of the tines controls the soil flow.
- Maintenance-free working parts with carbide plates.
The fertiliser is precisely placed below the soil surface - in the lower layer of soil. One part of the fertiliser is applied below the surface, in the lower soil layer, and the second part is applied just below the surface and laterally. The fertiliser is applied just below the soil surface and spread laterally.
Deep zonal loosening with partial mixing The optimised geometry of the tines ensures deep zonal loosening, improving water absorption into the soil. Ploughing without mixing soil layers The No-Mix Tine is ideal for breaking up compacted soil layers and restoring water absorption in waterlogged fields without actively mixing the soil layers.
Spring guard with one spring, release force 450 kg. Spring guard with two springs, release force 550 kg. Hydraulic protection, release force 600 kg.
Extremely durable materials The working parts are made of extremely durable high-quality materials, ensuring a long service life. The frame size is precisely calculated from the strongest metal. Extra durability of working parts To further extend the service life, the upper part of the tine can be additionally reinforced with sintered carbide plates or hardfacing.
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Setting the working depth Simple setting of the working depth with pins on the rollers. Adjustable leveling discs The height-adjustable screed discs and comfortable control knob ensure easy and ergonomic adjustment. Hydraulic adjustment of levelling discs Additional equipment. Simple, fast and convenient disc adjustment directly from the tractor cabin. Easy adjustment of external ironing discs The side levelling discs are easily adjustable with a pin, ensuring a precise connection between each pass.
One of the biggest advantages is versatility and adaptability, providing great work versatility. Full working width Working width – 3.8 m. Ability to work while folded For deeper soil loosening, the tine harrow can be folded, allowing the use of lower-powered traction equipment. Working width – 3 m. Full-area stubble shaving Tines with side wings for full-area stubble shaving up to 20 cm deep. Micro Drill for sowing small seeds The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Duolent DX 210 N Duolent DX 300 N
Duolent DX 300 N
Duolent DX 500 NS
Fertilizer application options
Two types of tillage
Durable and maintenance-free tine guard options with high release force
Sturdy construction
Easy to use
A cleverly designed machine
Examples of Duolent NS coulter combinations
75 MULTICARBIDE PRO Chisel width: 75 mm 75 MULTICARBIDE Chisel width: 75 mm 75 CARBIDE Chisel width: 75 mm 55 CARBIDE for loosening without mixing. Chisel width: 55 mm 40 CARBID Chisel width: 40 mm Right spreading wing CARBIDE Left spreading wing CARBIDE Right loosening wing Left loosening wing Left ironing board Right-hand ironing board Left ironing board with deflector Right-hand ironing board with deflector
Tubular TRS roller Diameter – 600 mm Double roller DR Diameter – 400/300 mm Ring roller RR Diameter – 520 mm Roller LTX Diameter – 586 mm Disc roller SDR Diameter – 580 mm Crosskill roller CR Diameter – 400 mm V-shaped VR roller Diameter – 600 mm The right type of rear roller has a significant impact on the final quality of soil cultivation. The roller compacts the soil, while simultaneously crumbling and leveling it. The type of roller is selected depending on the type of soil and the nature of the machine's use.
Pin set for Kirovec hitch system Suitable for Duolent DX 460 NS and DX 550 NS models.
Hydraulic leveling discs Hydraulic working level adjustment Micro Drill small seed drill Rear harrows behind the roller Double spring protection Protection of the cut-out screw. Not suitable for stony soils
Working tools
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +200-500 %
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +150-400 %
Chisel thickness: 15 mm
Chisel strength: up to 55 HRC
Carbide plate strength: up to 92 HRA
Usage time: +100-200%
Chisel thickness: 20 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Chisel thickness: 25 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Rollers
Weight – 100 kg/m
Weight – 135 kg/m
Weight – 160 kg/m
Weight – 200 kg/m
Weight – 220 kg/m
Weight – 180 kg/m
Weight – 175 kg/m
Tubular TRS roller Double DR roller Ring roller RR LTX roller SDR disc roller Crosskill CR roller V-shaped VR roller
Crushing ●●○○ ●●●● ●●●○ ●●●○ ●●●○ ●●●● ●●●○
Compaction ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●○○ ●○○○ ●●○○
Resistance to clogging ●○○○ ●●●○ ●●●● ●●●○ ●●●● ●●○○ ●●●○
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●○○ ●●●○
Suitability for wet soils ●○○○ ●●○○ ●●●● ●●●● ●●●● ●●○○ ●●●●
Suitability for heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●○ ●●●●
Suitability for light soils ●●●● ●●●● ●●●● ●●○○ ●●●○ ●●○○ ●●●○
Hanging
Other optional equipment
| DX 210 N | DX 300 N | DX 350 N FIX | DX 380 NS | DX 400 NS | DX 460 NS | DX 500 NS | DX 550 NS | |
|---|---|---|---|---|---|---|---|---|
| Type | hanging | hanging | hanging | hanging | hanging | hanging | hanging | hanging |
| Working width, mm | 2 100 | 3 000 | 3 500 | 3 800 | 4 000 | 4 600 | 5 000 | 5 500 |
| Transport width, mm | 2 230 | 3 000 | 3 500 | 2 200 | 3 000 | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 1 400 | 1 400 | 1 400 | 2 500 | 2 500 | 2 500 | 2 500 | 2 500 |
| Total length, mm | 3 350 | 3 350 | 3 350 | 3 350 | 3 350 | 3 350 | 3 350 | 3 350 |
| Working depth, mm | 60─350 | 60─350 | 60─350 | 60─350 | 60─350 | 60─350 | 60─350 | 60─350 |
| Tines, pcs. | 5 | 7 | 9 | 9 | 9 | 11 | 11 | 13 |
| Distance between tines, mm | 420 | 420 | 420 | 420 | 420 | 420 | 420 | 420 |
| Rows of tines, pcs. | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between rows, pcs. | 780 | 780 | 780 | 780 | 780 | 780 | 780 | 780 |
| Fork pressure force, kg | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 |
| Frame clearance, mm | 880 | 880 | 880 | 880 | 880 | 880 | 880 | 880 |
| Disc diameter, mm | 460 | 460 | 460 | 460 | 460 | 460 | 460 | 460 |
| Productivity, ha/hour | 1.7─2.5 | 2.4─3.6 | 2.8─4.2 | 3.1─4.5 | 3,2-4,8 | 3.7─5.5 | 4–6 | 4.4─6.6 |
| Tractor power, kW/HP | 65─110 90─135 | 90─135 120─180 | 105─160 140─210 | 120─180 160─240 | 120─180 160─240 | 150─225 200─300 | 150─225 200─300 | 180─270 240─360 |
| Working speed, km/h | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 |
| Maximum working slope, ° | 6 | 6 | 6 | 6 | 6 | 6 | 6 | 6 |
| Hydraulic connections/pressure, bar | - | - | - | 1 / 200 | 1 / 200 | 1 / 200 | 1 / 200 | 1 / 200 |
| Number/type of hydraulic connection pairs | - | - | - | 2 / ISO 12.5 | 2 / ISO 12.5 | 2 / ISO 12.5 | 2 / ISO 12.5 | 2 / ISO 12.5 |
| Tractor hitch | TPH Category 2 | TPH categories 2 and 3 | TPH categories 2 and 3 | TPH categories 2 and 3 | TPH Category 2 | TPH categories 2 and 3 | TPH categories 2 and 3 | TPH categories 2 and 3 |
| APPROXIMATE WEIGHT OF THE MACHINE | ||||||||
| Mechanical tine protection, kg | 1 375 | 1 760 | 2 175 | 2 750 | - | 3 075 | - | 3 325 |
| Hydraulic tine guard, kg | 1 450 | 1 850 | 2 275 | - | 3 100 | - | 3 350 | - |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You may also be interested in:
Popular
