Used KUHN FC 9530 R-FF rear (butterfly) and FC 3525 R-FF front mower set for sale, manufactured in 2024.
The equipment is in good working order and ready to use.
KUHN FC 9530 R-FF:
- Working width in combination with front mower: 9.53 m.
- Overlap between front and rear mowers (front 3.10 m): 30-50 cm.
- Overlap between front and rear mowers (front 3.50 m): 50-70 cm.
- Transport width: 2.95 m.
- Cutting table: the OPTIDISC ELITE.
- Number of discs (individual mower width, m): 2 × 8.
- Quick-change blades: FAST-FIT.
- Cutting height with standard gears: from 35 mm to 65 mm.
- Bearing protection - breakaway blade: PROTECTADRIVE.
- Soil copying: pendulum.
- Suspension: hydropneumatic LIFT-CONTROL.
- Continuous protection: NON-STOP.
- Washing system: two SQUAREFLEX polyurethane rollers.
- Scrubber speed: 780 rpm.
- Average width of the basin: 2 × 1.85 / 2.4 m.
- Wide spreading system: standard.
- Head control: hydrocylinder.
- Function control: lifting and transport setting.
- Hanging: tripod KAT. III and 4N.
- Parking: folded or unfolded on parking legs.
- GTV speed (min-1): 1000.
- Overload protection: standard.
- Wake-up coupling: integrated in the side gears.
- Tractor power requirement, kW/AG: 154/210.
- Tractor hydraulic connections: 2DA.
- Tractor electrical connections: 1 × 7-pin socket.
- Road lighting system: standard.
- Rear weight: 3 330 kg.
- GTV: 1 3/8″ 6.
- Side gears for cutting height 45-85 mm.
KUHN FC 3525 R-FF:
- Working width: 3.5 m.
- Transport width: 3.48 m.
- Cutting table: the OPTIDISC ELITE.
- Discs, with safety gears: 8 pcs.
- Blade attachment: quick-change FAST-FIT.
- Cutting height with standard drives: 35 to 65 mm.
- Removing disc elements from the top of the cutting table: standard.
- Disc table protection system - breakaway blade: PROTECTADRIVE.
- Copying the soil: swivel bars.
- Suspension: hydropneumatic LIFT-CONTROL.
- Scrubber: SQUAREFLEX - two polyurethane rollers.
- Washer speed: 780 rpm
- Washer gear: gear with anti-lock system.
- Approximate width of the pradalga: 1.4-2 m.
- Reversing system: via hydro cylinder.
- Hanging: tripod KAT. II.
- GTV speed (min-1): 1000 (to the right when viewed from the tractor cab).
- Wake-up clutch integrated in gearbox: standard.
- Theoretical tractor power requirement, kW/AG: 57 / 77.
- Tractor hydraulic connections required: 1 SA.
- Required electrical connections for the tractor: 1 × 7-pin socket.
- Dimensional lighting: standard.
- Approximate weight: 1 390 kg.
- GTV shaft: 1 3/8″ 6.
- Side gears for cutting height 45-85 mm.
You can visit our technical park in Kaunas.
