Two-row trailed tine cultivators for working up to 30 cm depth.
Trailed cultivators Duolent PS for post-harvest stubble shaving and cultivation up to 30 cm deep
Loosening up to 30 cm with excellent incorporation of plant residues.
- Working width 4.6 to 7.9 metres.
- Suitable for use with from 200 hp power technology.
- Forks arranged in two rows, with 37.5 / 42 cm tine spacing and 78 cm tine spacing between rows.
- Working depth 6 to 30 cm with intensive mixing.
Highlights of FARMET Duolent PS
Cultivation of stubble on the whole area
One of the main advantages of the Duolent PS tine cultivator is the high quality cultivation of the entire soil surface after harvesting. The massive tines loosen and mix the soil intensively, so that crop residues are evenly incorporated into the cultivated layer. This promotes faster decomposition of residues, improves soil structure and prepares the field for further tillage or sowing operations.
Excellent bandwidth
The Duolent PS tine cultivator offers excellent tine penetration thanks to the 42 cm tine spacing. This design allows the soil and crop residues to move easily through the working area, reducing the risk of blockages, even when working after harvest or with large amounts of straw. Thanks to its good permeability, the cultivator works stably and maintains an even cultivation result, helping to prepare the field efficiently for further work.
Wide choice of security systems
The machine can be equipped with different durable and maintenance-free tine protection systems, so it can be adapted to different soil conditions. With a release force of up to 600 kg, the guard systems help protect the working units from overloading and ensure reliable operation even on heavier or stony soils.
3-year warranty
All Farmet equipment comes with a 3-year warranty. The company pays particular attention to the high quality and reliability of its machinery. This commitment reflects the company's long-standing philosophy based on precision machining, durability and long service life.
Working areas
Shallow stubble cultivation with swallows to a depth of 6-20 cm.
Deep tillage without swallows up to 30 cm deep.
- Shake zone. Wide choice of working depths from 6 to 30 cm. The side wing coulter for full stubble cultivation is used for soil loosening from 6 to 20 cm. The two rows of tines ensure very good loosening of the soil, intensive mixing of soil and crop residues and very low resistance.
- Surface levelling zone. The levelling discs also improve the insertion of crop residues.
- Crushing and compaction zone. Optimal soil compaction ensures good water penetration and moisture retention.
High quality and efficient work
- Optimal tines shape results in low resistance and excellent mixing.
- 420 mm distance between tines ensures excellent permeability of plant residues.
- The curved top of the tines controls the soil flow.
- Maintenance-free working parts with carbide plates.
The fertiliser is precisely placed below the soil surface - in the lower layer of soil. One part of the fertiliser is applied below the surface, in the lower soil layer, and the second part is applied just below the surface and laterally. The fertiliser is applied just below the soil surface and spread laterally.
Deep zonal loosening with partial mixing The optimised geometry of the tines ensures deep zonal loosening, improving water absorption into the soil. Ploughing without mixing soil layers The No-Mix Tine is ideal for breaking up compacted soil layers and restoring water absorption in waterlogged fields without actively mixing the soil layers.
Spring guard with one spring, release force 450 kg. Spring guard with two springs, release force 550 kg. Hydraulic protection, release force 600 kg.
Extremely durable materials Extremely durable high-quality materials are used to manufacture the working parts, ensuring a long service life. Extra durability of working parts To further extend the service life, the upper part of the tine can be additionally reinforced with sintered carbide plates or hardfacing. Reinforced frame construction A frame made of high-grade steel, designed for intensive work, with increased structural dimensions.
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Setting the working depth Easy adjustment of the working depth of the tines via adjustment washers on the rollers. Height-adjustable leveling discs Height-adjustable ironing discs with easy adjustment, suspended on rubber elements. Hydraulic adjustment of levelling discs Optional equipment for trailed models. The disc position can be adjusted easily, quickly and conveniently directly from the tractor cabin – even when working outdoors. Easy adjustment of external ironing discs The side levelling discs are easily adjustable with a pin, ensuring a precise connection between each pass.
One of the biggest advantages is versatility and adaptability, providing great work versatility.
Turning on the roller Increased stability and fast turning at the end of the field thanks to the ability to turn on all rollers. Suspended ironing discs The suspended levelling discs ensure quality levelling of the soil surface. Folding system The patented folding system allows the 7.9 m working width to be folded to a transport width of 3 m and a height of 4 m. Full-surface stubble loosening The Swallow Tines provide full-surface cutting of the soil up to 20 cm deep. Micro Drill small seed drill The advanced design of the machine allows for the installation of Micro Drill seeding equipment for sowing cover crops or direct incorporation of grass.
Duolent DX 460 PS
Duolent DX 600 PS
Fertilizer application options
Two types of tillage
Durable and maintenance-free tine guard options with high release force
Sturdy construction
Easy to use
A cleverly designed machine
Examples of Duolent PS coulter combinations
75 MULTICARBIDE PRO Chisel width: 75 mm 75 MULTICARBIDE Chisel width: 75 mm 75 CARBIDE Chisel width: 75 mm 55 CARBIDE for loosening without mixing. Chisel width: 55 mm 40 CARBID Chisel width: 40 mm Right spreading wing CARBIDE Left spreading wing CARBIDE Right loosening wing Left loosening wing Left ironing board Right-hand ironing board Left ironing board with deflector Right-hand ironing board with deflector
Double roller DR Diameter – 400/300 mm Ring roller RR Diameter – 520 mm Double ring DRR roller Diameter – 540/540 mm Roller LTX Diameter – 586 mm Disc roller SDR Diameter – 580 mm V-shaped VR roller Diameter – 600 mm Double annular DVR roller Diameter – 550/550 mm The right type of rear roller has a significant impact on the final quality of soil cultivation. The roller compacts the soil, while simultaneously crumbling and leveling it. The type of roller is selected depending on the type of soil and the nature of the machine's use.
TPH Category 3 Eyelet for lower hitch Ø 40 mm, Ø 50 mm, Ø 70 mm K80 Ø 80 mm Pin set for category 4 three-point hitch (TPH)
Hydraulic leveling discs Hydraulic working level adjustment Hydraulic towbar Hydraulic brakes Micro Drill small seed drill Rear harrows behind the roller Double spring protection Dual loop 1 line brakes Protection of the cut-out screw. Not suitable for stony soils
Working tools
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +200-500 %
Chisel hardness: up to 55 HRC
Widia plate strength: Up to 92 HRA
Service life: +150-400 %
Chisel thickness: 15 mm
Chisel strength: up to 55 HRC
Carbide plate strength: up to 92 HRA
Usage time: +100-200%
Chisel thickness: 20 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Chisel thickness: 25 mm
Chisel strength: up to 55 HRC
Carbide plate strength: Up to 92 HRA
Usage time: +100-200 %
Fuel consumption: -10 %
Rollers
Weight – 135 kg/m
Weight – 160 kg/m
Weight – 195 kg/m
Weight – 200 kg/m
Weight – 220 kg/m
Weight – 175 kg/m
Weight – 180 kg/m
Features Double DR roller Ring roller RR Double ring DRR roller LTX roller SDR disc roller V-shaped VR roller Double DVR roller
Crushing ●●●● ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Compaction ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●●●● ●●●● ●●●● ●●●● ●●○○ ●●○○ ●●○○
Resistance to clogging ●●●○ ●●●● ●●●● ●●●○ ●●●● ●●●○ ●●●○
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●○ ●●●●
Suitability for light soils ●●●● ●●●● ●●●● ●●○○ ●●●○ ●●●○ ●●●○
Towing
Other optional equipment
| DX 420 PSM | DX 460 PS | DX 570 PSM | DX 600 PS | DX 720 PSM | DX 800 PS | |
|---|---|---|---|---|---|---|
| Type | trailed | trailed | trailed | trailed | trailed | trailed |
| Working width, mm | 4 200 | 4 600 | 5 700 | 6 200 | 7 200 | 7 900 |
| Transport width, mm | 3 000 | 3 000 | 3 000 | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 2 700 | 2 700 | 3 050 | 3 300 | 3 750 | 4 000 |
| Total length, mm | 6 762 | 6 762 | 6 762 | 6 762 | 6 762 | 6 762 |
| Working depth, mm | 60─300 | 60─300 | 60─300 | 60─300 | 60─300 | 60─300 |
| Tines, pcs. | 11 | 11 | 15 | 15 | 19 | 19 |
| Distance between tines, mm | 375 | 420 | 375 | 420 | 375 | 420 |
| Rows of tines, pcs. | 2 | 2 | 2 | 2 | 2 | 2 |
| Distance between rows, pcs. | 780 | 780 | 780 | 780 | 780 | 780 |
| Fork pressure force, kg | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 | 450 / 550 / 600 |
| Frame clearance, mm | 880 | 880 | 880 | 880 | 880 | 880 |
| Disc diameter, mm | 460 | 460 | 460 | 460 | 460 | 460 |
| Productivity, ha/hour | 3.4─5 | 3.7─5.5 | 4.6─6.8 | 4.8─7.2 | 5.8─8.6 | 6.4─9.6 |
| Tractor power, kW/HP | 150─225 200─300 | 150─225 200─300 | 220─330 300─450 | 220─330 300─450 | 265─400 360─540 | 265─400 360─540 |
| Working speed, km/h | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 | 8─12 |
| Maximum working slope, ° | 6 | 6 | 6 | 6 | 6 | 6 |
| Tire measurements - for transportation | 19.0/45-17 | 19.0/45-17 | 19.0/45-17 | 19.0/45-17 | 19.0/45-17 | 19.0/45-17 |
| Brakes | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits | air / 2 circuits |
| Required pressure, kPa | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 | 8,5 |
| Hydraulic connections/pressure, bar | 3 / 200 | 3 / 200 | 3 / 200 | 3 / 200 | 3 / 200 | 3 / 200 |
| Number/type of hydraulic connection pairs | 6 / ISO 12.5 | 6 / ISO 12.5 | 6 / ISO 12.5 | 6 / ISO 12.5 | 6 / ISO 12.5 | 6 / ISO 12.5 |
| Tractor hitch | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm | TPH categories 3 and 4; lower suspension K80; eyelet Ø 40, 50, 70 mm |
| Weight (min), kg | 4 240 | 4 450 | 5 750 | 6 050 | 6 450 | 6 795 |
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You may also be interested in:
Popular
