The advantages of disc and tine cultivators are combined in one pass.
Triton combi trimmer Combines the advantages of disc and tine cultivators in one pass
Full-area soil cultivation with loosening up to 35 cm depth
1. Full-area cutting zone. The aggressive geometry, two-row disc section ensures excellent full-area cutting at a depth of 0–12 cm with intensive mixing of crop residues. The disc section spreads crop residues over the full area.
2. Loosening zone. Wide choice of working depths from 3 to 35 cm. Tines with side wings for full-area stubble shaving are used when loosening the soil from 6 to 20 cm. The optimized geometry tines, arranged in two rows, ensure deep loosening of the area, increasing water penetration.
3. Surface leveling zone. Leveling discs also improve the incorporation of crop residues.
4. Clump breaking and soil compaction zone. Optimal soil compaction ensures good water penetration into the soil and moisture retention.
High quality and efficient work
- The perfect solution for heavy soils
- Comparatively low resistance
- High permeability of soil and plant residues
- Effective shaving and incorporation of crop residues into the cultivated soil layer
- Deep zone cultivation with minimal clod formation
Wear-resistant steel
Leveling disc protection Quick-attach roller system
Positioning the disc rows Hydraulic adjustment of levelling discs
Triton 300 PS combination cultivator
Triton 450 PS combination cultivator
Triton 600 PS combination cultivator
Sturdy construction
Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.
The time-tested tips are made of high-strength wear-resistant steel and coated with carbide plates. The option with hard alloy inserts along the entire length of the tip extends their service life even further.
Spring-loaded tine protection
Durable and maintenance-free spring-loaded tine protection with a high release force of 550 kg (optional equipment).
Durable and maintenance-free protection for leveling discs.
Easy removal and installation of rear rollers – it is possible to work without rear rollers.
Easy to use
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Setting the working depth
Easy adjustment of working depth using adjustment washers.
Working depth adjustment
Easy adjustment of working depth using adjustment washers.
Easy adjustment of the front and rear disc row positions. When the front row is set lower than the rear row, cultivation becomes more aggressive.
Tubular roller TRS
Diameter – 586 mm
Diameter – 680 mm
Diameter – 680/680 mm
The correct selection of the rear roller type, which significantly contributes to the final quality of cultivation, is of utmost importance. The soil is repeatedly compacted by the roller, while at the same time breaking up clods and leveling the surface. The type of roller is selected taking into account the type of soil and the planned use of the machine.
75 MULTICARBIDE PRO Coulter width – 75 mm 75 MULTICARBIDE Coulter width – 75 mm 75 CARBIDE Coulter width – 75 mm 40 CARBIDE Coulter width – 40 mm 55 CARBIDE Coulter width – 55 mm DURA+ disc Ø 510 mm DURA+ disc Ø 560 mm Left wing Right wing
Eyelet for lower hitch Ø 50 mm, Ø 70 mm K80 Ø 80 mm Pin set for TPH category 4 hitch
Electro-hydraulic flow distributor Micro Drill small seed drill
Rollers
Diameter – 600 mm
Weight – 100 kg/m
Double ring roller DRR
Diameter – 680/680 mm
Weight – 340 kg/m
Roller LTX
Weight – 200 kg/m
Disc roller SDR
Diameter – 580 mm
Weight – 220 kg/m
V-shaped roller VR
Weight – 175 kg/m
Double V-shaped annular roller DVR
Weight – 290 kg/m
Tubular TRS roller Double ring DRR roller LTX roller SDR disc roller V-shaped VR roller Double roller DVR
Crushing ●●○○ ●●●○ ●●○○ ●●●○ ●●●○ ●●●○
Compaction ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Resistance to clogging ●○○○ ●●●● ●●●○ ●●●○ ●●●● ●●●●
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Suitability for wet soils ●○○○ ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for heavy soils ●●○○ ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●●● ●●●○ ●●●○ ●●●● ●●●●
Working tools
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +200–500 %
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +150–400 %
Coulter thickness – 15 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200 %
Coulter thickness – 25 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200%
Diesel consumption – -10%
Coulter thickness – 20 mm
Coulter body hardness – up to 55 HRC
Widia plate hardness – up to 92 HRA
Coulter service life – +100–200%
Diesel consumption – -10%
Towing
Other optional equipment
Divides one tractor hydraulic circuit into three separate circuits.
| Triton 300 P | Triton 400 PS | Triton 450 PS | Triton 600 PS | |
|---|---|---|---|---|
| Working width, mm | 3 000 | 4 000 | 4 500 | 6 000 |
| Transport width, mm | 3 000 | 3 000 | 3 000 | 3 000 |
| Transport height, mm | 1 800 | 3 050 | 3 370 | 3 950 |
| Total length, mm | 9 450 | 9 500 | 9 500 | 9 550 |
| Working depth, mm | 30─350 | 30─350 | 30─350 | 30─350 |
| Tines, pcs. | 7 | 9 | 11 | 15 |
| Discs, pcs. | 22 | 34 | 38 | 50 |
| Disc diameter, mm | 510 / 560 | 510 / 560 | 510 / 560 | 510 / 560 |
| Number of tine rows, pcs. | 2 | 2 | 2 | 2 |
| Distance between tines, mm | 420 | 420 | 420 | 420 |
| Distance between tine rows, mm | 1 720 | 2 140 | 2 140 | 2 190 |
| Rows of discs, pcs. | 2 | 2 | 2 | 2 |
| Distance between discs, mm | 240 | 240 | 240 | 240 |
| Distance between disc rows, mm | 850 | 850 | 850 | 850 |
| Fork pressure force, kg | 450 / 550 | 450 / 550 | 450 / 550 | 450 / 550 |
| Frame clearance, mm | 880 | 880 | 880 | 880 |
| Diameter of leveling discs, mm | 460 | 460 | 460 | 460 |
| Productivity, ha/hour | 2.2─3.4 | 3.2─4.8 | 3.6─5.4 | 4.8─7.2 |
| Tractor power, kW/HP | 150─235 200─315 | 185─290 245─370 | 225─350 300─450 | 350─460 450─600 |
| Working speed, km/h | 8─12 | 8─12 | 8─12 | 8─12 |
| Maximum working slope, ° | 6 | 6 | 6 | 6 |
| Tire dimensions for transportation | 19.0/45-17 | 550/45-22,5 | 550/45-22,5 | 550/45-22,5 |
| Brakes | air / dual-circuit | air / dual-circuit | air / dual-circuit | air / dual-circuit |
| Required pressure, kPa | 5,5 | 5,5 | 5,5 | 5,5 |
| Hydraulic connections/pressure, bar | 4 / 200 | 5 / 200 | 5 / 200 | 5 / 200 |
| Number/type of hydraulic connection pairs | 8 / ISO 12.5 | 10 / ISO 12.5 | 10 / ISO 12.5 | 10 / ISO 12.5 |
| Towing | TPH category 3; bottom hitch K80; eyes Ø 50, 70 mm | TPH category 3; bottom hitch K80; eyes Ø 50, 70 mm | TPH category 3; bottom hitch K80; eyes Ø 50, 70 mm | TPH category 3; bottom hitch K80; eyes Ø 50, 70 mm |
| Weight, kg | 4 700 | 7 300 | 8 100 | 10 200 |
"We worked where it was wet and there was a lot of straw, and the implement worked very well."
View review
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.