Germinators Kompaktomat Max

12.5–15.7 meter trailed germinators are designed to prepare the soil after plowing.

For consultation or to receive a purchase offer, please contact the following contacts:

Compactomat MAX – a trailed germinator with a working width of 12.5 m and 15.7 m that prepares the soil for sowing after plowing in one pass.

1. Tractor track loosening zone. Precise track cultivation ensures even crop germination.
2. Primary soil leveling zone. A thoroughly leveled soil surface ensures even further compaction and soil cultivation.
3. Soil compaction zone with the front roller. The front roller breaks up clods on the soil surface, at the same time compacting the soil and restoring its capillarity.
4. Seedbed formation zone. The tine section loosens the soil to a set depth. This depth should correspond to the depth of the future sowing. The tine with arrow tines ensures full surface shaving and weed control.
5. Furrow leveling area behind the tine section.
6. Soil compaction zone with rear roller. The roller finely crushes clods and ensures final soil compaction to fully restore its capillarity. Intensive capillary movement of water to the surface ensures good plant germination even in dry periods.
7. Final soil leveling zone. The rear leveling board ensures perfect soil leveling for subsequent sowing.

High quality and efficient work

Underway 7 operations at the same time.
Large working speed – up to 14 km/h.
Suitable for use with tractors up to 600 hp.
Creates proper soil structure and compacts it, ensuring even cultivation.
Precise setting of the working depth of the coulters ensures very good seedbed preparation.
Automatic tine protection guarantees uninterrupted operation.
Excellent leveling of uneven terrain.

Compactor K 1570 MAX

1. Tractor wheel track looseners are designed to lift compacted soil.

2. Front leveling section for rough surface leveling.

3. Front roller for breaking up clumps.

4. The tine section cuts and cultivates the soil.

5. Central leveling board, levels the tilled soil and directs it towards the rear roller.

6. Rear roller for final soil treatment.

7. The rear leveling section levels the surface.

Excellent surface smoothing, clod breaking

In one pass, the soil is prepared to a condition suitable for sowing. The main advantages of this machine are excellent surface leveling, fine clod breaking and the formation of well-compacted soil for sowing. The soil is also perfectly leveled thanks to the leveling sections, which can level and distribute even large irregularities.

Prepares the soil for sowing in one pass

High working speed allows you to achieve high work productivity even when working with the Kompaktomat unit with a smaller working width. Thanks to the extremely well-designed design and the optimal weight of the Kompaktomat, the soil is cultivated in one pass after ploughing.

Several working operations are performed in one pass, during which the soil surface is leveled and compacted at the selected depth. The soil capillarity is restored and the sowing base is formed at the required depth. The clods are finely crushed.

Simple operation

Additionally, the germinator can be equipped with hydraulic adjustment of the working depth of the tine section and hydraulic adjustment of the front leveling section.

Minimum maintenance requirements

The controls of the Germinator are designed to ensure maximum worker safety. Simple but high-quality construction with with minimal maintenance requirements.

Road transportation

All variants are equipped with a transport folding mechanism to ensure that the machine does not exceed the maximum permissible weight. 3 meters transport width and 4 meters transport height. Folding is hydraulic and fully automatic.

Poor cultivation

With uneven soil cultivation, there is a risk that plants will germinate incorrectly and unevenly.

Quality cultivation
Uniform soil cultivation using the Kompaktomat germinator results in uniform plant germination.

Excellent compaction → ensures water absorption and capillary rise of water to the surface

Sturdy construction

Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.

Extremely durable materials

Extremely durable, high-quality materials used for the production of working parts ensure a long service life. Robust frame construction.

Solid frontno ironing section

Ensures high-quality soil surface leveling.

Tine protection
Automatic tine protection.

Easy to use

Minimal number of adjustable and lubricated points, so maintenance is extremely easy.

Minimum number of adjustable seats.
Minimum number of places to apply.

Front ironing section

Adjusting the height of the front screed section

Leveling section behind the tine section

Adjusting the height of the leveling section behind the tine section

Working depth
Setting the working depth of the coulters

A cleverly designed machine

One of the biggest advantages is versatility and adaptability, providing great work versatility.

Folding into transport position

Compact folding into transport position.
Excellent maneuverability and ease of transportation on public roads are guaranteed.

Tine sections

View the differences in each section Optional equipment

Section AL

Section CF

Section AP

Rollers

Ring roller RR
Diameter – 400 mm
Weight – 115 kg/m

Can be used as a front and rear roller.
It works well in all types of soils, maintains good working depth, and is suitable even for wetter soils.

Crosskill roller CR

Diameter – 400 mm

Weight – 133 kg/m

Can only be used as a rear roller.
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking.

Double Crosskill roller DCR

Diameter – 400 mm
Weight – 185 kg/m
Distance between roller rows – 274 mm

Can only be used as a rear roller.
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking. Compared to the Crosskill roller, it ensures more intensive clod breaking.

Spiral beam roller SB

Diameter – 400 mm
Weight – 70 kg/m

Can be used as a front and rear roller.
High-quality clod breaking. Suitable for use in wet conditions.

Beam roller BR

Diameter – 400 mm
Weight – 63 kg/m

Can be used as a front and rear roller.
Good clod breaking. Not very suitable for wet conditions.

The correct selection of the rear roller type, which significantly contributes to the final quality of cultivation, is of utmost importance. The soil is repeatedly compacted by the roller, while at the same time breaking up clods and leveling the surface. The type of roller is selected taking into account the type of soil and the planned use of the machine.

	Crosskill roller CR	Double Crosskill roller DCR	Beam roller BR	Spiral beam roller SB	Ring roller RR
Crushing	●●●●	●●●●	●●●○	●●●○	●●○○
Compaction	●●●●	●●●●	●●●○	●●●○	●●●●
Depth support	●○○○	●●○○	●●●○	●●●○	●●●●
Resistance to clogging	●●●○	●●●●	●●○○	●●●○	●●●●
Suitability for rocky soils	●●○○	●●○○	●●●○	●●●○	●●●○
Suitability for wet soils	●●○○	●●●○	●○○○	●●●○	●●●●
Suitability for heavy soils	●●●○	●●●●	●●○○	●●○○	●●●○
Suitability for medium soils	●●●●	●●●●	●●●○	●●●○	●●●○
Suitability for light soils	●●●●	●●●●	●●●●	●●●●	●●●○

Working tools

Kompaktomat boom tine DURA+

Designed for AL / AP sections and CA wheel mark eradicators.

CARBIDE chisel

For the CF section.

Double-sided chisel

For the CF section.

Dvipusis noragas, skirtas vėžių purentuvams CC.

Double-sided chisel

Designed for CC track looseners.

Tine sections

AP section

Universal tillage section with 27 cm wide tine arms arranged in two rows. The tines are mounted on tine holders with a geometry that improves the throughput of crop residues. This tine section is suitable for fields with a lot of chopped crop residues, as well as for heavy soils. Comes standard with a height-adjustable levelling beam behind the tines.

AL section

The section consists of 27 cm wide tine arms arranged in two rows. This section is suitable for light soils without crop residues. Comes standard with a height-adjustable levelling beam behind the tines

CF section

The section consists of 3.5 cm wide narrow tines arranged in four rows. Ideal for spring soil preparation or heavy soils where raising moist soil to the surface is undesirable. Standard equipped with a leveling beam behind the tines

	AL	AL-L	CF	CF-L	AP	AP-L	AL4
Number of tine rows, pcs. / distance between rows, mm	2 / 400	2 / 510	4 / 240	4 / 265	2 / 490	2 / 600	4 / 270
Leveling beam behind the tines	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●
Full surface cultivation	●●●●	●●●●	●●○○	●●○○	●●●●	●●●●	●●●●
Suitability for light soils	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●	●●●●
Suitability for medium soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●●
Suitability for heavy soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●●
Suitability for rocky soils	●●●○	●●●○	●●●○	●●●○	●●●●	●●●●	●●●○
Suitability for wet soils	●●○○	●●○○	●●●●	●●●●	●●○○	●●○○	●●●○
Resistance to clogging	●●○○	●●○○	●●●○	●●●○	●●●○	●●●○	●●●○

Track looseners

Track cultivators with CA boom tine

Automatically releasing tractor wheel mark eradicators with a tine arm. Suitable for light soils where there is no risk of raising wet clods to the surface.

Track cultivators with double-sided tines CC

Automatic release tractor wheel mark eradicators with double-sided tines. Suitable for heavy soils where there is a risk of raising wet clods to the surface.

Ironing sections

Fixed ironing section

Automatically releasing levelling beam with toothed profile. Robust construction ensuring precise levelling of large clods.

FL = fixed mechanical slide, FH = fixed hydraulic slide.

lyginimo sijos peiliai veikia kaip vientisas elementas, užtikrinantis geresnį stabilumą.

The screed blades work as a single unit, providing better stability.

Rear sections

Rear leveling beam

Passive soil levelling behind the rear roller. The aggressiveness of the levelling strip is adjusted by means of rotary stops. Can be used with all types of rear rollers.

Rod roller RF

Active crushing of remaining clods behind the rear roller.

Crosskill roller RFC

Active crushing of remaining clods behind the rear roller.

Can be used with all types of rollers in the Kompaktomat LONG model. Cannot be used behind the rear double-row rollers in the Kompaktomat PS model.

Towing

Lower hitch eye

C50, C70 – maximum vertical load – 3000 kg.

C50 – connecting pin Ø 50 mm
C70 – connection pin Ø 70 mm

K80 coupling Ø 80 mm

Maximum vertical load – 3000 kg.

K80 – towbar 80 mm

Other optional equipment

Electro-hydraulic flow distributor
Divides one tractor hydraulic circuit into three separate circuits.

Dual-line single-circuit pneumatic brakes

	Compact machine K 1250 MAX	Compact machine K 1570 MAX	Compact machine K 1250 MAX LONG	Compact machine K 1570 MAX LONG
Working width, mm	12 500	15 700	12 500	15 700
Transport width, mm	3 000	3 000	3 000	3 000
Transport height, mm	3 500	3 500	3 750	3 750
Total length, mm	11 300	11 300	11 550	11 550
Working depth, mm	0-100	0-100	0-100	0-100
Arrow tines – AL section, pcs.	53	67	53	67
Arrow tines – AL4 section, pcs.	-	-	95	118
Forged tines – CF section, pcs.	119	149	119	149
Arrow tines – AP section, pcs.	53	67	53	67
Productivity, ha/hour	12–15	13–20	12–15	13–20
Tractor power, kW/HP	243/330	316/430	243/330	316/430
Working speed, km/h	10–14	10–14	10–14	10–14
Maximum working slope, °	6	6	6	6
Tire measurements - for transportation	19,0/45-17	19,0/45-17	19,0/45-17	19,0/45-17
Brakes	air / 2 circuits	air / 2 circuits	air / 2 circuits	air / 2 circuits
Required pressure, kPa	8,5	8,5	8,5	8,5
Brake dimensions	300/60	300/60	300/60	300/60
Hydraulic connections/pressure, bar	4–6 / 200	5–7 / 200	4–6 / 200	5–7 / 200
Number/type of hydraulic connection pairs	8-12 / ISO 12.5	10-14 / ISO 12.5	8-12 / ISO 12.5	10-14 / ISO 12.5
Towing	lower suspension K80; eyelet Ø 50, 70 mm	lower suspension K80; eyelet Ø 50, 70 mm	lower suspension K80; eyelet Ø 50, 70 mm	lower suspension K80; eyelet Ø 50, 70 mm
Lower hitch eye height	600–650	600–650	600–650	600–650
Axle load, kg	4 350 / 4 350	5 000 / 5 000	4 600 / 4 600	5 350 / 5 350
Weight, kg	10 500	12 500	11 200	13 500

FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.

Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.

FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.