3-10 meter trailed germinators are designed to prepare the soil after plowing.
Compactom P/PS – trailed germinator with a working width of 3–10 meters, time-tested, in one pass preparing the soil for sowing after plowing.
Compact PS
Compactor PS LONG
1. Tractor track loosening zone. Precise track cultivation ensures even crop germination.
2. Primary soil leveling zone. A thoroughly leveled soil surface ensures even further compaction and soil cultivation.
3. Soil compaction zone with the front roller. The front roller breaks up clods on the soil surface, at the same time compacting the soil and restoring its capillarity.
4. Seedbed formation zone. The tine section loosens the soil to a set depth. This depth should correspond to the depth of the future sowing. The tine with arrow tines ensures full surface shaving and weed control.
5. Furrow leveling area behind the tine section.
6. Soil compaction zone with rear roller. The roller finely crushes clods and ensures final soil compaction to fully restore its capillarity. Intensive capillary movement of water to the surface ensures good plant germination even in dry periods.
7. Final soil leveling zone. The rear leveling board ensures perfect soil leveling for subsequent sowing.
High quality and efficient work
- Underway 7 operations at the same time.
- Large working speed – up to 14 km/h.
- Creates proper soil structure and compacts it, ensuring even cultivation.
- Precise setting of the working depth of the coulters ensures very good seedbed preparation.
- Automatic tine protection guarantees uninterrupted operation.
- Excellent leveling of uneven terrain.
- A reliable germinator for your farm work with optimal soil compaction.
7. The rear leveling section levels the surface.
7. The rear leveling section levels the surface.
Up to 9 operations in one pass. Suitable for more intensive soil cultivation after ploughing, when the amount of crop residues is minimal.
Greater permeability of plant residues. Suitable for soil cultivation after loosening, when there is a lot of crushed plant residues on the surface.
The germinator controls are designed to ensure maximum worker safety. Simple but high-quality construction with minimal maintenance requirements.
Quality cultivation
Used for production extremely high quality materials and applies eXtra STEEL line The technology guarantees long-term use even in the most difficult conditions.
Tine protection
Deflector behind the loosening section
Working depth
One of the biggest advantages is versatility and adaptability, providing great work versatility.
View the differences in each section Optional equipment Section AL Section CF Section AP Section AL4
The trailed Kompaktomat K 300 P – K 1000 PS germinators can be combined with other units and machines. Additionally, a rear three-point category 2 hitch must be selected.
Combination with additional compaction rollers
Compactor K 800 PS
1. Tractor wheel track looseners are designed to lift compacted soil.
2. Front leveling section for rough surface leveling.
3. Front roller for breaking up clumps.
4. The tine section cuts and cultivates the soil.
5. Central leveling board, levels the tilled soil and directs it towards the rear roller.
6. Rear roller for final soil treatment.
Compactor K 800 PS LONG
1. Tractor wheel track looseners are designed to lift compacted soil.
2. Front leveling section for rough surface leveling.
3. Front roller for breaking up clumps.
4. The extended two-row tine section with increased throughput cuts and loosens the soil.
5. Central leveling board, levels the tilled soil and directs it towards the rear roller.
6. Rear roller for final soil treatment.
Excellent surface smoothing, clod breaking
In one pass, the soil is processed to a condition suitable for sowing, and the main advantages of the machine are: excellent surface smoothing, fine crushing of lumps and formation of well-compacted soil for sowing.
Post-ploughing configurations
Configurations for work after loosening
Minimum maintenance requirements
Poor cultivation
With uneven soil cultivation, there is a risk that plants will germinate incorrectly and unevenly.
Uniform soil cultivation using the Kompaktomat germinator results in uniform plant germination.
Excellent compaction → ensures water absorption and capillary rise of water to the surface
Sturdy construction
Extremely durable materials
Extremely durable, high-quality materials used for the production of working parts ensure a long service life. Robust frame construction.
Solid frontno ironing section
Ensures high-quality soil surface leveling.
Automatic tine protection.
Easy to use
Minimal number of adjustable and lubricated points, so maintenance is extremely easy.
Front ironing section
Adjusting the height of the front screed section
Hydraulic control of the front leveling section
The position of the front screed section can be continuously adjusted during operation, depending on the prevailing conditions. Can also be fitted to older models.
A sturdy deflector for better crop residue throughput is an optional extra.
Leveling section behind the loosening section
Height adjustment of the leveling section located behind the loosening section.
Setting the working depth of the coulters
Hydraulic working depth adjustment
The working depth of the loosening section can be conveniently adjusted hydraulically directly from the tractor cabin. Can also be fitted to older models.
A cleverly designed machine
Folding into transport position
Tine sections
Combination with other units
Combination with additional compaction rollers
Only three-point hitch required
Combination with a seed drill
Hydraulic connections for the pneumatic seed drill fan and a hydraulic connection for controlling the seed drill marker must be selected.
Ring roller RR Can be used as a front and rear roller.
Weight – 133 kg/m Can only be used as a rear roller.
Diameter – 400 mm Can only be used as a rear roller.
Diameter – 400 mm Can be used as a front and rear roller.
Diameter – 400 mm Can be used as a front and rear roller.
Diameter – 400 mm Can only be used as a rear roller.
Diameter – 400 mm Can only be used as a rear roller.
Diameter – 400 mm High-quality clod breaking. Suitable for working in wet conditions.
The correct selection of the rear roller type, which significantly contributes to the final quality of cultivation, is of utmost importance. The soil is repeatedly compacted by the roller, while at the same time breaking up clods and leveling the surface. The type of roller is selected taking into account the type of soil and the planned use of the machine.
Kompaktomat boom tine DURA+ Designed for AL / AP sections and CA wheel mark eradicators. Kompaktomat boom tine DURA+ Designed for AL4 section. CARBIDE chisel For the CF section. Double-sided chisel For the CF section. Double-sided chisel Designed for CC track looseners.
AP section Universal tillage section with 27 cm wide tine arms arranged in two rows. The tines are mounted on tine holders with a geometry that improves the throughput of crop residues. This tine section is suitable for fields with a lot of chopped crop residues, as well as for heavy soils. Comes standard with a height-adjustable levelling beam behind the tines.
AL section The section consists of 27 cm wide tine arms arranged in two rows. This section is suitable for light soils without crop residues. Comes standard with a height-adjustable levelling beam behind the tines
AL4 section (suitable for Kompaktomat LONG) The section consists of 15 cm wide tine arms arranged in four rows. This section is suitable for light, medium and heavy soils. It is equipped with a height-adjustable levelling beam behind the tines as standard.
CF section The section consists of 3.5 cm wide narrow tines arranged in four rows. Ideal for spring soil preparation or heavy soils where raising moist soil to the surface is undesirable. Standard equipped with a leveling beam behind the tines
Track scarifiers CA Automatically releasing tractor wheel mark eradicators with a tine arm. Suitable for light soils where there is no risk of raising wet clods to the surface.
Track cultivators with double-sided tines CC Automatic release tractor wheel mark eradicators with double-sided tines. Suitable for heavy soils where there is a risk of raising wet clods to the surface.
Fixed ironing section Automatically releasing levelling beam with toothed profile. Robust construction ensuring precise levelling of large clods. FL = fixed mechanical slide, FH = fixed hydraulic slide.
Flexi-board ironing board Automatically unprotected levelling beam, consisting of individual flexible segments. Better clod breaking. L = Flexi-board, FB = hydraulically operated Flexi-board.
The screed blades work as a single unit, providing better stability.
Additional leveling section mounted behind the front roller FRL Designed for the Kompaktomat LONG model. Automatic leveling section with the possibility of setting the lower position. The leveling section ensures more intensive mixing, resulting in a finer soil structure.
Rear leveling beam Passive soil levelling behind the rear roller. The aggressiveness of the levelling strip is adjusted by means of rotary stops. Can be used with all types of rear rollers. Rod roller RF Active crushing of remaining clods behind the rear roller. Crosskill roller RFC Active crushing of remaining clods behind the rear roller. Can be used with all types of rollers in the Kompaktomat LONG model. Cannot be used behind the rear double-row rollers in the Kompaktomat PS model.
Rear suspension TPH cat. 2 and 3 The trailed Kompaktomat germinators can be equipped with a rear linkage for aggregation with other equipment. The rear linkage is a two-hose hydraulic system for folding additional equipment. Hydraulic connection for controlling the drill marker Possibility of additionally installing a single or dual-hose hydraulic system to control the drill markers on the Kompaktomat germinator with rear TPS suspension. Hydraulic connections for the drill fan Hydraulic connections for the pneumatic seed drill fan can be optionally available together with the rear TPH suspension.
TPH hitch T2, T3, T4 – aggregation into rear suspension arms. T2 – connection pins Ø 28 mm
Lower hitch eye C40, C50, C70 – maximum vertical load – 3000 kg. C40 – connection pin Ø 40 mm
K80 coupling Ø 80 mm Maximum vertical load – 3000 kg. K80 – towbar 80 mm
Electro-hydraulic flow distributor Dual-line single-circuit pneumatic brakes
Rollers
Diameter – 400 mm
Weight – 115 kg/m
It works well in all types of soils, maintains good working depth, and is suitable even for wetter soils.
Crosskill roller CR
Diameter – 400 mm
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking.
Double Crosskill roller DCR
Weight – 185 kg/m
Distance between roller rows – 274 mm
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking. Compared to the Crosskill roller, it ensures more intensive clod breaking.
Spiral beam roller SB
Weight – 70 kg/m
High-quality clod breaking. Suitable for use in wet conditions.
Beam roller BR
Weight – 63 kg/m
Good clod breaking. Not very suitable for wet conditions.
Two Crosskill rollers CR + CR
Weight – 265 kg/m
Distance between roller rows – 505 mm
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking.
Double Crosskill Roller DCRL
Weight – 185 kg/m
Distance between roller rows – 505 mm
Excellent work in light, medium and heavy soils, high-quality compaction and clod breaking. Compared to the Crosskill roller, it ensures more intensive clod breaking.
Spiral beam roller SB + Crosskill roller CR
Weight – 203 kg/m
Distance between roller rows – 505 mm
Crosskill roller CR Beam roller BR Spiral beam roller SB Ring roller RR Double Crosskill roller DCR Double Crosskill Roller DCRL Two Crosskill rollers CR + CR Spiral beam roller SB + Crosskill roller CR
Crushing ●●●● ●●●○ ●●●○ ●●○○ ●●●● ●●○○ ●●●● ●●●●
Compaction ●●●● ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●● ●●●●
Depth support ●○○○ ●●●○ ●●●○ ●●●● ●●○○ ●●○○ ●●○○ ●●●○
Resistance to clogging ●●●○ ●●○○ ●●●○ ●●●● ●●●● ●●●○ ●●●○ ●●○○
Suitability for rocky soils ●●○○ ●●●○ ●●●○ ●●●○ ●●○○ ●●●● ●●○○ ●●○○
Suitability for wet soils ●●○○ ●○○○ ●●●○ ●●●● ●●●○ ●●○○ ●●○○ ●○○○
Suitability for heavy soils ●●●○ ●●○○ ●●○○ ●●●○ ●●●● ●●●● ●●●○ ●●○○
Suitability for medium soils ●●●● ●●●○ ●●●○ ●●●○ ●●●● ●●●● ●●●● ●●●○
Suitability for light soils ●●●● ●●●● ●●●● ●●●○ ●●●● ●●●● ●●●● ●●●●
Working tools
Tine sections
AL AL-L CF CF-L AP AP-L AL4
Number of tine rows, pcs. /
distance between rows, mm2 / 400 2 / 510 4 / 240 4 / 265 2 / 490 2 / 600 4 / 270
Leveling beam behind the tines ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Full surface cultivation ●●●● ●●●● ●●○○ ●●○○ ●●●● ●●●● ●●●●
Suitability for light soils ●●●● ●●●● ●●●● ●●●● ●●●● ●●●● ●●●●
Suitability for medium soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●● ●●●● ●●●●
Suitability for heavy soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●● ●●●● ●●●●
Suitability for rocky soils ●●●○ ●●●○ ●●●○ ●●●○ ●●●● ●●●● ●●●○
Suitability for wet soils ●●○○ ●●○○ ●●●● ●●●● ●●○○ ●●○○ ●●●○
Resistance to clogging ●●○○ ●●○○ ●●●○ ●●●○ ●●●○ ●●●○ ●●●○
Track looseners
Ironing sections
Rear sections
Rear suspension – for aggregation with other machines
Towing
T3 – connection pins Ø 36 mm
T4 – connection pins Ø 50 mm
C50 – connecting pin Ø 50 mm
C70 – connection pin Ø 70 mm
Other optional equipment
Divides one tractor hydraulic circuit into three separate circuits.
KOMPAKTOMAT models without brakes
Compact machine
K 300 PCompact machine
K 400 PSCompact machine
K 450 PSCompact machine
K 500 PSCompact machine
K 600 PS
Working width, mm 3 000 4 000 4 500 5 000 6 000
Transport width, mm 3 000 3 000 3 000 3 000 3 000
Transport height, mm 1 650 2 670 3 030 2 790 3 230
Total length, mm 5 965 5 965 5 965 6 105 6 105
Working depth, mm 0-100 0-100 0–100 0-100 0-100
Arrow tines – AL section, pcs. 13 18 20 23 27
Forged tines – CF section, pcs. 30 39 47 49 59
Arrow tines – AP section, pcs. 12 16 20 23 24
Productivity, ha/hour 2,2 - 3,2 3-4 3,5 - 4,5 3-5 3,5 - 6
Tractor power, kW/HP 70/95 90/125 110/150 120/165 130/180
Working speed, km/h 10–14 10–14 10–14 10–14 10–14
Maximum working slope, ° 11 6 6 6 6
Tire measurements - for transportation 400/60-15,5 400/60-15,5 400/60-15,5 19,0/45-17 19,0/45-17
Hydraulic connections/pressure, bar 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200
Number/type of hydraulic connection pairs 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5
Towing TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm
Lower suspension link axle spacing (alternative spacing), mm 1 010
(920)1 010
(920)1 010
(920)1 010
(920)1 010
(920)
Diameter of the holes in the lower suspension links for the machine suspension pins (alternative Ø) 37,5
(29)37,5
(29)37,5
(29)37,5
(29)37,5
(29)
Axle load, kg 1 960 2 080 2 240 2 730 2 950
Weight, kg 2 360 3 010 3 340 4 025 4 360
KOMPAKTOMAT models with brakes
Compact machine
K 500 PSCompact machine
K 600 PSCompact machine
K 700 PSCompact machine
K 800 PSCompact machine
K 1000 PS
Working width, mm 5 000 6 000 7 000 8 000 9 850
Transport width, mm 3 000 3 000 3 000 3 000 3 000
Transport height, mm 2 790 3 230 3 830 4 000 4 000
Total length, mm 6 105 6 105 6 105 6 105 6 660
Working depth, mm 0-100 0-100 0–100 0-100 0-100
Arrow tines – AL section, pcs. 23 27 31 35 43
Forged tines – CF section, pcs. 49 59 69 77 91
Arrow tines – AP section, pcs. 23 24 31 32 38
Productivity, ha/hour 3–5 3.5–6 4.5–7 5.5–8 8.5–10
Tractor power, kW/HP 120/165 130/180 150/205 160/220 180/245
Working speed, km/h 10–14 10–14 10–14 10–14 10–14
Maximum working slope, ° 6 6 6 6 6
Tire measurements - for transportation 19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17
Brakes air / 2 circuits air / 2 circuits air / 2 circuits air / 2 circuits air / 2 circuits
Required pressure, kPa 8,5 8,5 8,5 8,5 8,5
Brake dimensions 300/60 300/60 300/60 300/60 300/90
Hydraulic connections/pressure, bar 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200
Number/type of hydraulic connection pairs 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5
Towing TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm
Lower suspension link axle spacing (alternative spacing), mm 1 010
(920)1 010
(920)1 010
(1 045)1 010
(1 045)1 010
(1 045)
Diameter of the holes in the lower suspension links for the machine suspension pins (alternative Ø) 37,5
(29)37,5
(29)37,5
(50)37,5
(50)37,5
(50)
Axle load, kg 2 730 2 950 3 360 3 620 4 520
Weight, kg 4 025 4 360 4 960 5 345 6 920
COMPACTOMAT LONG
Compact machine
K 500 PS LONGCompact machine
K 600 PS LONGCompact machine
K 700 PS LONGCompact machine
K 800 PS LONGCompact machine
K 1000 PS LONG
Working width, mm 5 000 6 000 7 000 8 000 10 000
Transport width, mm 3 000 3 000 3 000 3 000 3 000
Transport height, mm 2 790 3 230 3 830 4 000 4 000
Total length, mm 6 355 6 355 6 355 6 355 6 910
Working depth, mm 0-100 0-100 0–100 0-100 0-100
Arrow tines – AL section, pcs. 23 27 31 35 43
Arrow tines – AL4 section, pcs. 41 47 55 61 91
Forged tines – CF section, pcs. 49 59 69 77 38
Arrow tines – AP section, pcs. 23 24 31 32 76
Productivity, ha/hour 3–5 3.5–6 4.5–7 5.5–8 8.5–10
Tractor power, kW/HP 120/165 130/180 150/205 160/220 180/245
Working speed, km/h 10–14 10–14 10–14 10–14 10–14
Maximum working slope, ° 6 6 6 6 6
Tire measurements - for transportation 19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17 19,0/45-17
Brakes air / 2 circuits air / 2 circuits air / 2 circuits air / 2 circuits air / 2 circuits
Required pressure, kPa 8,5 8,5 8,5 8,5 8,5
With brakes/without brakes yes / yes yes / yes yes / yes yes / no yes / no
Brake dimensions 300/60 300/60 300/60 300/60 300/90
Hydraulic connections/pressure, bar 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200 2–4 / 200
Number/type of hydraulic connection pairs 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5 4-8 / ISO 12.5
Towing TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm TPH categories 2 and 3; lower suspension K80; eyelet Ø 40, 50, 70 mm
Lower suspension link axle spacing (alternative spacing), mm 1 010
(920)1 010
(920)1 010
(1 045)1 010
(1 045)1 010
(1 045)
Diameter of the holes in the lower suspension links for the machine suspension pins (alternative Ø) 37,5
(29)37,5
(29)37,5
(50)37,5
(50)37,5
(50)
Axle load, kg 2 810 3 030 3 460 3 720 4 850
Weight, kg 4 125 4 460 5 110 5 495 7 420
FARMETH – the largest manufacturer of agricultural machinery for tillage and sowing in the Czech Republic. The company, founded in 1992, is growing rapidly and devotes much attention and investment to the development of new technologies.
FARMETH agricultural equipment manufactured by this manufacturer must meet the strictest standards of work quality, reliability and durability. All equipment of this manufacturer 36 months warranty provided.
Products and technologies are developed in close collaboration with customers, research institutes and universities. FARMETH The products feature unique technological solutions, some of which are patented. The company seeks not only to improve product quality and create added value, but also to improve production technologies, productivity, and improve occupational safety and environmental protection.
FARMETH The brand is focused on high-quality products and high value. Major investments in modern production management ensure further quality improvement and more efficient production. The goal is to increase the added value of products and strengthen their competitiveness in all markets.
You can rent this equipment!
We offer the possibility of this technique rent for a day, a week or any other time you want. For rental conditions or other land cultivation, sowing, fodder preparation, and fertilization equipment, please contact our technical department.
You may also be interested in:
Germinators Kompaktomat N-NS
2.6–6 meter suspended germinators are designed to prepare the soil after plowing.
Germinators Kompaktomat Max
12.5–15.7 meter trailed germinators are designed to prepare the soil after plowing.